Extended Administration; Configure Network Parameters; Network Addresses - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Extended Administration

Configure Network Parameters

To access a SIP server as an IP client some network related information
have to be configured.
Depending on the SIP network environment different changes are
necessary

Network Addresses

Phone path
Parameter
(Menu
DHCP
IP Assignment - 01=Network
- 01=DHCP IP assign
page 175
(switch on/off)
Terminal
IP Address - 01=Network
- 02=Terminal IP addr.
page 223
(change IP address)
Terminal Mask
- 01=Network
page 223
- 03=Terminal mask
(change terminal mask)
Default Route
(Gateway) - 01=Network
- 04=Default route
page 174
(change default route)
IP Route 1/2
(IP address/
- 01=Network
Gateway/Mask) - 05=IP routing
- 1=Route 1 or
page 191
- 2=Route 2
- 1=IP address 1/2
(change IP address)
- 2=Gateway 1/2
(change IP address)
- 3=Mask 1/2
(change subnet mask)
DNS Domain
Name - 01=Network
- 07=DNS Domain name
page 182
(change domain name)
page 48.
page 148)
Extended Administration
Web Interface path
(Menu page 110)
- Network IP and routing
- DHCP
(activate/deactivate checkbox)
- Network IP and routing
- Terminal IP address
(enter IP address)
- Network IP and routing
- Terminal mask
(enter terminal mask)
- Network IP and routing
- Default gateway
(enter gateway address)
- Network IP and routing
- IP routing (Route 1/2)
- Route
(enter IP address)
- Gateway
(enter IP address)
- Mask
(enter subnet mask)
- Network IP and routing
- Domain name
(enter domain name)
57