Ping; Port Control; Primary Dns Ip Address; Qdc Address - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Ping

• Run this PING test to check whether a server or another terminal de-
vice (e.g. the optiPoint 410/420 family S V7 .0 or servers) can be
reached by IP or domain name.
• For this, enter or select an
get (the connection to which you wish to test).
• Value range table (for user specified IP):
Permitted values
Length max.
• Editing by phone: IP Number Editor
cable page 41 — also Text Editor
page 95

Port Control

This parameters are needed for development only. The following options are
availabel:
• Service Agent
–
• TestInterface
• Resource Sharing
• SNMP Port
• Web Server
– Enables/disables the Web interface for this phone
page 99

Primary DNS IP address

• Enter the IP address of the
DHCP dynamically (
• Value range table:
Permitted values
Length max.
• Editing by phone: IP Number Editor
page 57

QDC Address

Enter IP address of the Quality Data Collection Server. For more informa-
tion refer to HiPath QoS Data Collection V1.0 Interface Description.
page 142
IP address or domain name as a test tar-
numeric (with DNS also alphanumeric)
15 digits (incl. dots)
(with DNS also 92 digits)
page 139
page 145
DNS server if not provided by
DHCP IP assignment).
numeric
15 digits (incl. dots)
page 114
Alphabetical Reference
page 159 and — if DNS is appli-
page 155
page 159.
207