Key test
•
Test to check the functions of the telephone keys.
•
If you press a key on the optiPoint 410/420 family S V7 .0 (except the
:
key), the associated LED lights up and the corresponding name is
displayed in the
page 96
Layer 2/3
The QoS technology based on layer 2 and the two QoS technologies Diff-
serv and TOS/IP Precedence based on layer 3 are allowing the VoIP appli-
cation to request and receive predictable service levels in terms of:
•
data through put capacity (bandwidth)
•
latency variations (jitter)
•
and delay.
For further information see
page 58
Layer 3 Voice
Can be defined only if the
sired value – see
page 58
Layer 3 Signalling
Can be defined only if the
sired value – see
page 58
Layer 2 Default
•
Can be defined only if the
Service (QoS)).
•
Value range table:
Permitted values
Range
Default values
page 58
Layer 2 signalling
Can be defined only if the
vice (QoS)).
page 58
LCD display. The
page 140
Quality of Service (QoS)
page 117
Layer 3 support is activated . Select the de-
Quality of Service (QoS)
page 117
Layer 3 support is activated . Select the de-
Quality of Service (QoS).
page 117
Layer 2 support is activated (
numeric
0 ... 7 (for each 64 positions)
pos. 12: 6, pos. 18: 3
page 117
Layer 2 support is activated (
page 117
Alphabetical Reference
:
key terminates the test.
Quality of
Quality of Ser-
193