Sip Auto Reconnect; Sip Beep On Auto Answer; Sip Beep On Auto Reconnect; Sip Password - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

SIP Auto reconnect

• This setting controls whether or not a toggle (or alternate) between the
active call and held call can be signalled to the phone and be automat-
ically applied. Automatic reconnect will only apply to the primary line of
a Keyset. Mark this option enabled/disabled.
• Use this option for placing a call on hold and for retrieving it again using
both a CTI application and the telephone.
page 64

SIP Beep on auto answer

• This setting controls whether or not beeping is heard (via the current
audio path) when an alerting call is auto-answered. Mark this option en-
abled/disabled.
page 64

SIP Beep on auto reconnect

• This setting controls whether or not beeping is heard (via the current
audio path) when a toggle (or alternate) between the active call and
held call occurs automatically. Mark this option enabled/disabled.
page 64

SIP password

• Value range table:
Permitted values
Length min.
Length max.
• Editing by phone: Password Editor
page 62

SIP realm

• This field displays the realm that the phone is registered in.
• Authentication
• Value range table:
Permitted values
Length max.
• Editing by phone: Text Editor
page 62
page 116
page 116
page 116
alphanumeric
6 digits
24 digits
page 115
alphanumeric
92 digits
page 155.
page 115
Alphabetical Reference
page 158.
215