Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual page 240

Troubleshooting
No terminal Mask is set
The DHCP IP assignment
is configured (Code 5).
Possible solution
Activate the DHCP IP assignment
Enter the terminal Mask
No Default Route is set
The DHCP IP assignment
is configured (Code 6).
Possible solution
Activate the DHCP IP assignment
Enter the default route
Subscriber identity not set
The subscriber identity (number or name) is not configured (Code 7).
Possible solution
Enter number or/and name
No network
The telephone cannot find the network (Code 8).
Possible solution
Check the network cable.
SIP Server address not set
The DHCP setting is switched off an a SIP server has not been configured
(Code 9).
Possible solution
Configure SIP server address
240
page 54 is switched off and no terminal Mask
page 54.
page 54.
page 54 is switched off and no default route
page 54.
page 54.
page 115.
page 115.