Terminal Ip Address; Terminal Mask; Terminal Name - Siemens HIPATH 8000 HIPATH 8000 Administrator's Manual

Terminal IP address

• Enter the IP address for the optiPoint 410/420 family S V7 .0 if not
provided by DHCP dynamically (
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
Permitted values
Length max.
• Editing by phone: IP Number Editor
page 57

Terminal mask

• Enter the Subnet Mask for the optiPoint 410/420 family S V7 .0 if not
provided by DHCP dynamically (
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
Permitted values
Length max.
• Editing by phone: IP Number Editor
page 57

Terminal name

• The phone will send REGISTER messages containing the contents of
this parameter, but only when the Register by Name field
is set to "On" and the SIP Routing field
• Whether this parameter is used, depends on the configuration of the
registrar server.
• Value range table:
Permitted values
Length max.
• Editing by phone: Text Editor
page 61
numeric
15 digits (incl. dots)
page 114
numeric
15 digits (incl. dots)
page 114
alphanumeric
92 digits
page 155.
page 115
Alphabetical Reference
DHCP IP assignment).
page 159.
DHCP IP assignment).
page 159.
page 216 is set to "Server".
page 210
223