Make Sure Your Tester Is Ready To Certify Cabling - Fluke CableAnalyzer DSX-602 User Manual

DSX-602 CableAnalyzer
Users Manual
not have a Last ID, the tester counts the set as one ID. An ID can
have a maximum of 60 characters. Symbols, such as the asterisk,
and accented characters do not increment." on page 78 for
more information about the Next ID list.
This icon shows when the tester's link interface adapter

is connected to the adapter on a DSX-602 remote and the
remote is turned on.
 The asset management icon shows when the owner of a
LinkWare Live account has enabled the asset management
service on the tester. See "About the Asset Management Service"
on page 90.
This icon shows when the talk function is on. To use the

talk function:
1 Connect the main and remote testers together through a
link that has one or more good wire pairs.
2 Connect headsets to the headset jacks on the testers.
3 Press the button on one of the headset microphones or
press  on the remote, then speak into the
microphone.
Make Sure Your Tester is Ready to Certify
Cabling
To make sure your tester meets its accuracy specifications, follow
these guidelines:
 Keep the tester's software current. The latest software is
available on the Fluke Networks website. See "Update the
Software" on page 95.
Set the reference for the twisted pair adapters every 30 days.

See page 29.
Make sure that you select the correct cable type for the job,

and that the NVP for the cable is correct. See Table 2 on
28