Set Up A Project; The Project Screen - Fluke CableAnalyzer DSX-602 User Manual

DSX-602 CableAnalyzer
Users Manual

Set Up a Project

Refer to the PROJECT screen in Figure 28 on page 77.
1 On the home screen, tap the PROJECT panel, tap CHANGE
PROJECT, then tap NEW PROJECT.
2 On the NEW PROJECT screen, enter a name for the project,
then tap DONE.
3 On the PROJECT screen, tap the Operator panel to enter an
operator name for the project.
4 On the PROJECT screen, tap the NEW TEST button to enter
the tests and test settings necessary for the project.
5 On the PROJECT screen, tap the NEW ID SET button to make
one or more sets of cable IDs for the project. See the CABLE ID
SETUP screen in Figure 29 on page 79.
6 On the PROJECT screen, tap DONE.

The PROJECT Screen

To start a new project, tap the PROJECT panel on the screen.
Figure 28 shows the PROJECT screen and describes the items you
enter to make a project.
The name of the project. See also item

Operator: The name of the person who will do the tests for the

project. For each operator you can also enter the email address
that the operator will use as an ID to sign in to LinkWare Live.
The date range for the results in the project.

Results: A summary of the test results in the project:

: The number of tests that failed.
: The number of tests that passed.
76
.
