Delete Wi-Fi Settings And Passwords; About The Asset Management Service - Fluke CableAnalyzer DSX-602 User Manual

DSX-602 CableAnalyzer
Users Manual
Table 5. Settings for the Wi-Fi Connection (continued)
Setting
Static address
settings

Delete Wi-Fi Settings and Passwords

The tester saves the security settings and passwords for the Wi-Fi
connections you use.
To delete all Wi-Fi settings and passwords
On the home screen, tap TOOLS, then tap Network, tap the Wi-Fi
panel, then tap FORGET ALL.

About the Asset Management Service

LinkWare Live's asset management service lets you see the
locations of your DSX-602 testers in the field. The owner of the
LinkWare Live account can enable or disable the service remotely
for each DSX-602 tester.
When this service is enabled on a DSX-602 tester, the asset
management icon (
a technician uses the tester to sign in to LinkWare Live, the
tester's location shows on a map on LinkWare Live's ASSETS page.
You can enable or disable the asset management
service only with LinkWare Live. There is no
setting on the DSX-602 tester that enables or
disables this service.
90
Enter an IP address for the tester and the Subnet Mask,
Gateway address, and DNS1 and DNS2 addresses for the
network. If you are not sure what to enter, speak to the
network administrator.
The Security settings are the same as for the DHCP address
settings.
) shows on the tester's home screen. When
Note
Description