Table of Contents
Advertisement
7
On the SYNC PROJECTS screen (Figure 30 on page 86), select
the projects you want to sync, then tap SYNC.
Use LinkWare Live Through a Wi-Fi Ethernet
Network
The tester can use wireless network channels 1 through 11.
To connect the tester to a Wi-Fi network
1
On the home screen, make sure the Operator name is correct.
The tester uses the email address associated with the operator
name as the ID when you sign in to LinkWare Live.
If no address is associated with the name, or if you enter a
different address on the LWL SIGN IN screen, the tester
associates the name with the address you enter.
2
On the home screen, tap the SYNC icon.
3
Select a wireless network if necessary.
If the network setting are not correct, the tester shows the
NETWORK screen and a message about the necessary settings.
a. To change the settings, tap the Wi-Fi panel.
b. To test the settings, go back to the WI-FI PORT screen, then
tap CONNECT.
When the tester connects to the network, the Wi-Fi
network connection icon shows at the top of the screen:
c.
Go back to the TRANSFER RESULTS screen, then tap the
LinkWare Live panel.
4
On the LWL SIGN IN screen, if necessary, enter the ID and
password for your LinkWare Live account, then tap SIGN IN.
5
Enter a user name and password for the network, if necessary.
Chapter 6: Sync Projects with LinkWare
Use LinkWare Live Through a Wi-Fi Ethernet Network
™
Live
-continued-
85
- Quick Links:
- Overview of Features
- Pass*/Fail* Results
Hide quick links:
Advertisement
Table of Contents
