How to Do an Autotest
Figure 22 shows the equipment for tests on coaxial cabling.
You can do the HDTDR, length, and resistance
tests without a remote tester. See "Tests Without
a Remote" on page 62.
If you have two main testers, you can use one as a
remote. To select the remote function, tap TOOLS
> Main as Remote.
A
Main and remote testers
Two DSX-CHA003 adapters
For tests on network cabling:
F-connector to BNC adapters
and patch cords (typically 50 )
Figure 22. Equipment for Tests on Coaxial Cabling
Notes
C
B
Chapter 3: Certify Coaxial Cabling
How to Do an Autotest
E
D
For tests on video cabling:
F-connector adapters and patch
cords (typically 75 )
AC adapters (optional)
BK181.EPS
57