Table of Contents
Advertisement
5
Setting the Software
This section gives instructions on how to set DVPEN01-SL by DCISoft and explanations on each setup page. Before
you start a setup page, you have to select Ethernet in the Communication Setting window. Next, you can search by
IP address or use Auto-Search. You also can open the setup page for DVPEN01-SL by RS-232. DVPEN01-SL is set by
UDP port 20006; therefore, you have to be aware of the relevant settings of the firewall.
5.1 Setting Communication & Searching for Modules
Communication settings
1. Open DCISoft in your PC and click on Communication Setting.
2. Select Ethernet as the transmission type.
DVP-PLC Operation Manual
Ethernet Communication Module DVPEN01-SL
15
Advertisement
Table of Contents
