6. To clear the password, simply leave the password columns blank. Click on Apply to clear the password.
7. After the password is cleared, you can modify the parameters.
6.4 When the Password is Lost (Returning to Default Setting by RS-232)
Application
Returning to default setting by RS-232
Network
(1) DVPEN01-SL is set with a password.
environment
(2) The password is forgotten.
1. Use DVPACAB2A30 cable to connect the PC and DVPEN01-SL and open the setup page. Open the Security
page.
DVP-PLC Operation Manual
Ethernet Communication Module DVPEN01-SL
41