Web Configuration; Main Logon Interface - Zte ZXV10 H100 User Manual

Home gateway

Table of Contents

4 WEB Configuration

The H100 provide configuration tools based on the WEB interface to facilitate

configuration and management through the WEB explorer. For ease of operation, you

can use one cross-over or straight-through Ethernet cable to connect a PC to the

Ethernet interface of the H100 in the first configuration of the H100. Refer to the

section of Configuration Inspection in the above chapter to check whether the TCP/IP

protocol of the PC is set correctly or not, whether any running firewall or security

software needs to be stopped or not and whether the proxy server setting of the

explorer needs to be prohibited or not.

This manual introduces how to configure the H100 with the Internet Explorer 6.0 in the

Windows 2000 Professional operating system.

Open the explorer, input http://192.168.1.1 (the default IP address of the LAN side

interface of the H100 is 192.168.1.1) in the Address URL Editor and then enter. The

logon interface shown below appears. Type in the password to enter the H100

configuration interface (the default WEB logon user name and password are admin

and admin):

4-1

Table of Contents