Zte ZXV10 H100 User Manual page 29

4.2.2.1 Bridge (Pure Bridge) Connection
Upon configuration of the ATM-related parameters, select the button in front of Bridge
Config to configure the related parameters of a Bridge (pure bridge) connection.
NAS Interface No.
the character string "nas" when an interface is created, for example nas0, nas1.
Encapsulation Type
Upon configuration of the above parameters, click the <Apply> button to create a
2684Bridged encapsulated nas interface. If you need to set up a Bridge (pure bridge)
connection, the nas interface will act as an interface of the bridge connection and form
a bridge group with another LAN side interface (generally eth0). Refer to the Bridge
interface for the operation of adding to the bridge group. If you need to set up a MER
(MAC Encapsulated Routing) connection, you must configure the IP address of this
Bridge connection interface No.. The configured No. follows
Value range: LLC/VCC.
4-5
Chapter 4 WEB Configuration