Zte ZXV10 H100 User Manual page 38

ZXV10 H100 Home Gateway User Manual (Draft)
In the RIP configuration interface shown below, you can configure Hostname,
Password, Enable Password and RIP Version (RIP version No.) and the interface where
the RIP is activated.
4.2.5 DHCP Server
The DHCP Server List Interface shows the configuration parameters of the current
DHCP server. The DHCP server configuration interface will show up when you click
the <Add> or <Modify> button. In this interface, you can set the configurations of the
DHCP server.
In this interface, you can also Enable or Disable the DHCP server. The content
displayed on the button changes according to the running status of the DHCP server.
"Enable" is displayed in the disabled status and "Disable" is displayed in the enabled
status.
To modify the existing server configurations, select the server, click the <Modify>
button and then complete the modification in the DHCP server configuration interface.
When the related interface is disabled, you can perform the Modify and Delete
operations on the existing server configurations.
4-14