Table of Contents
Advertisement
ZXV10 H100 Home Gateway User Manual (Draft)
Click the <Delete> button to remove the session from the configuration file and stop it.
4.2.2.3 PPPoA Connection
If you want to implement the PPPoA dial-up connection through the H100, a PPPoA
connection must be set up. Upon configuration of the ATM-related parameters, select
the button in front of PPPoA to configure the related parameters of the PPPoA
connection. PPPOA (PPP over ATM) is a method for using the PPP protocol on the
ATM network described in RFC 2364.
Interface Profile No.
Username& Password The user name and password to be authenticated.
Authentication type
Trace
should be displayed at the console, value range: ON/OFF.
Encapsulation type
Default:
Value range: 0-9.
The authentication protocol type, vale range: PAP/CHAP.
Whether the information controlling the session negotiation
Packet encapsulation type, value range: LLC/VC.
Select whether a default route is generated.
4-8
Advertisement
Table of Contents
