Table of Contents
Advertisement
ZXV10 H100 Home Gateway User Manual (Draft)
4.2 Basic Configuration
Click the <Setup> button in the WEB interface to enter the basic configuration of the
H100. In the basic configuration, you can configure the parameters such as LAN
interface parameter, ADSL WAN connection parameter, static route and RIP
dynamic route protocol, DHCP Server and DHCP Relay, DNS Relay, Bridge
connection, STP (Spanning Tree Protocol), SNTP (Simple Network Time Protocol),
SNMP (Simple Network Management Protocol) and WLAN (IEEE802.11b/g)
parameter.
4.2.1 LAN Interface Information
Click the LAN Setup link in the left of the interface to enter the [LAN Setup]
interface, where you can configure the IP address of the Ethernet interface of the H100.
LAN IP address: IP address of Ethernet interface eth0
LAN netmask:
Subnet mask of Ethernet interface eth0
4-2
Advertisement
Table of Contents
