Configuration Inspection - Zte ZXV10 H100 User Manual

3.3 Configuration Inspection

After the above preparations, switch on the H100, and you will see that the power
indicator is on. At the same time, the H100 executes the device start-up process and
detects the connected devices. You can see from the indicators which devices have
been connected to the H100 successfully. The indicators of the network interfaces
connecting to successfully connected devices will be solid on.
You may also use the PING command to check the network connection status of the PC
and the H100. For example, the steps for connection through the Ethernet interface in
[Local Connections] in the Windows 2000 operating system are as follows:
•
•
Click the [Start→Run] menu;
Type in "CMD" in the dialog box popped up and then enter;
3-3
Chapter 3 Client Settings