Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zte ZXBIV IPTV
Summary of Contents for Zte ZXBIV IPTV
- Page 1 ZXBIV IPTV Multimedia Solution MDP Operation Manual Version 3.04.05 ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: (86) 755 26771900 Fax: (86) 755 26770801 URL: http://ensupport.zte.com.cn E-mail: support@zte.com.cn...
- Page 2 The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPO- RATION is prohibited.
-
Page 3: Table Of Contents
Querying Connected EPG Device ........12 Querying Connected USS Device........13 Node Management............13 Querying Node ............15 Adding Node .............16 Modifying Node ............19 Deleting Node ............19 Synchronizing Weight..........19 Agent Management............20 Querying Agent ............20 Adding Agent ............21 Confidential and Proprietary Information of ZTE CORPORATION... - Page 4 Deleting EPG Device ..........45 Querying Node Performance..........45 Querying USS Unit Performance ........46 VCDN Management.......... 49 VCDN Introduction............49 Configuring VCDN............49 VCDN Node Management..........50 Querying VCDN Nodes..........50 Viewing VCDN Node ...........51 Adding VCDN Node ............51 Confidential and Proprietary Information of ZTE CORPORATION...
- Page 5 Querying Content Distribution Task ........66 Channel Management ........69 Channel Management.............69 Querying Live Channel ..........69 Viewing Live Channel ..........70 Adding Live Channel ..........71 Modifying Live Channel..........77 Deleting Live Channel ..........78 Updating Default Program...........78 Adding Relay.............78 Confidential and Proprietary Information of ZTE CORPORATION...
- Page 6 Querying New Content Push Policy .......97 Adding New Content Push Policy ........97 Modifying New Content Push Policy ......98 Deleting New Content Push Policy ........98 Authority Management ........99 Operator Management............99 Adding Operator ............99 Confidential and Proprietary Information of ZTE CORPORATION...
- Page 7 Operator Group Management ........104 Adding Operator Group ..........104 Modifying Operator Group......... 105 Deleting Operator Group........... 105 Configuring Operator Group Authority ......106 Searching Operator Log..........107 Figures ............109 Tables ............113 Glossary ............115 Confidential and Proprietary Information of ZTE CORPORATION...
- Page 8 ZXBIV IPTV MDP Operation Manual This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 9: About This Manual
About This Manual Purpose This purpose of this manual is to let the engineers and technicians master the methods for various operations in the ZXBIV IPTV MDP platform. Intended This manual is intended for engineers and technicians who perform Audience operations in the ZXBIV IPTV MDP platform. - Page 10 Double- Refers to quickly clicking the primary mouse button click (usually the left mouse button) twice. Right-click Refers to clicking the secondary mouse button (usually the right mouse button) once. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 11: Mdp Introduction
VCDNs. And each VCDN is provided to a service provider dedicatedly to develop IPTV service. VCDN management includes: VCDN management � VCDN node management � Node dependence management � IP segment management � Confidential and Proprietary Information of ZTE CORPORATION... -
Page 12: Logging Into Mdp
Logging into MDP Steps 1. Open the IE browser and input the URL of the MDP platform, for example, http://10.42.109.88:8080/iptvcdn, and then press Enter on keyboard to open the login page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 13: Figure 1 Mdp Login Page
The system administrator can create operator and assign � authority for the operator. After being created, the operator can log into the MDP system. Click the button to return to the login interface. � Confidential and Proprietary Information of ZTE CORPORATION... -
Page 14: Figure 2 Mdp Home Page
ZXBIV IPTV MDP Operation Manual 2 MDP H IGURE ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 15: System Resource Management
To reset the query conditions, click the Reset button. 3. Click the query button and the query result is shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 16: Adding Network Type Identifier
Network Input the description of the The description text cannot exceed 255 bytes. Description new network. 4. Click the Confirm button to save the settings. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 17: Modifying Network Type Identifier
OK button. ND OF STEPS Network IP Segment Management Network IP segment management is used to configure the start and end IP address for the selected network. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 18: Querying Network Ip Segment
Input the end IP address IP address style: 000.000.000.000 of the IP segment. For example: 172.036.116.036 Network Select the network. Select the network from the pull-down list. Name 3. Click the add button, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 19: Deleting Network Ip Segment
To reset the query conditions, click the Reset button. 3. Click the query button to start querying the CP device and the query result is shown as the Web page below. CP D IGURE UERYING EVICE Confidential and Proprietary Information of ZTE CORPORATION... -
Page 20: Adding Cp Device
Fill in an IP address according to the actual situation. adress address of the CP device Wlan IP WLAN Fill in an IP address according to the actual situation. adress address of the CP device Confidential and Proprietary Information of ZTE CORPORATION... -
Page 21: Modifying Cp Device
Querying Connected Agent Device Steps 1. Click System Resource > CP Device. 2. Query the CP device to be checked. 3. Click the Connected Agent link to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 22: Querying Connected Epg Device
The figure above displays the association between the CP de- vice and EPG devices. To remove the association, click the remove link at the line of the selected EPG device. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 23: Querying Connected Uss Device
There are three CDN networking approaches: 1. Single-central node structure is shown in Figure 15 S IGURE INGLE ENTRAL TRUCTURE The central node stores programs. � The edge node directly provides service to users. � Confidential and Proprietary Information of ZTE CORPORATION... -
Page 24: Figure 16 Multiple-Central Nodes Structure
Cache mecha- nism. 3. Meshed structure is shown in Figure 17 M IGURE ESHED TRUCTURE Each edge nodes store programs. � Each edge node directly provides service to users. � Confidential and Proprietary Information of ZTE CORPORATION... -
Page 25: Querying Node
3. Click the query button to get the query result, as shown below. 18 Q IGURE UERYING 4. Click the view link at the line of the selected node to check the detail information, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 26: Adding Node
19 C IGURE HECKING ETAILED NFORMATION ND OF STEPS Adding Node Steps 1. Click System Resource > Node. 2. Click the add button to open the Web page shown below. 20 A IGURE DDING Confidential and Proprietary Information of ZTE CORPORATION... -
Page 27: Table 4 Node Parameters
(MB) Maxi- Input the maximum Set the number according to the actual application. concurrent stream number. For example: 500 con- current streams Weekly This function is useless in Sched- this version. uling Tasks Confidential and Proprietary Information of ZTE CORPORATION... - Page 28 Note: The CP must have already be created. belongs. Otherwise, no options in the drop-down list. Node Input the new node The description text must not exceed 255 bytes. descrip- description. tion Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 29: Modifying Node
3. Click the remove link at the line of the selected node and then in the pop-up confirmation box click the OK button. ND OF STEPS Synchronizing Weight Steps 1. Click System Resource > Node. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 30: Agent Management
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 31: Adding Agent
Input the new The agent name should not contain “'”. agent name. It is recommended to name the Agent in the form of "Agent+Agent IP address (the former 10 digits)". For example: agent0100400431. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 32: Modifying Agent
3. Click the modify link at the line of the selected agent to open the Web page shown below. 25 M IGURE ODIFYING GENT 4. Modify the parameters as required. Node name, Set it to be master agent and Net ID of IP1 are not editable. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 33: Deleting Agent
3. Click the query button to get the query result, as shown below. 26 Q POP U IGURE UERYING 4. Click the View link at the line of the selected POP unit to check the detail information, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 34: Adding Pop Unit
The name should not contain “'”. name. For example: unit058223240057. POP unit The upper space limit Input the space size according to the actual storage space for the shared disk application. (MB) array. Maximum: 999999999 M. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 35: Figure 29 Adding Pop Unit (Uss Node)
IP address style: 000.000.000.000 of the USS unit. For example: 010.040.035.0125 USS unit signal Input the IP address IP address style: 000.000.000.000 of the USS to For example: 010.040.035.0125 communicate with the MDU. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 36: Modifying Pop Unit
30 M POP U IGURE ODIFYING 4. Set the POP unit parameters as required. Node name and POP unit type are not editable. 5. Click Confirm to save the settings. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 37: Deleting Pop Unit
3. Click the query button to get the query result, as shown below. 31 Q USS U IGURE UERYING 4. Click the View link at the line of the selected USS unit to check the detail information, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 38: Adding Uss Unit Ftp
FTP user Input the FTP Input the FTP user name and password according to name/pass- login user the actual application. word name/password. 4. Click the Confirm button to save the settings. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 39: Modifying Uss Unit Ftp
The larger the weight sum of different functions is, the heavier burden this service devices bear. Querying Device Weight Steps 1. Click System Resource > Device Weight. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 40: Adding Device Weight Configuration
36 C IGURE HECKING ETAILED EIGHT ONFIGURATION ND OF STEPS Adding Device Weight Configuration Steps 1. Click System Resource > Device Weight. 2. Click the add button to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 41: Modifying Device Weight
The description text must less than 255 description weight. bytes. 4. Click the Confirm button to save the settings. ND OF STEPS Modifying Device Weight Steps 1. Click System Resource > Device Weight. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 42: Node Device Management
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 43: Adding Node Device
40 C IGURE HECKING ETAILED NFORMATION ND OF STEPS Adding Node Device Steps 1. Click System Resource > Node Device. 2. Click add to open the Web pages shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 44: Figure 41 Adding Node Device
ZXBIV IPTV MDP Operation Manual 41 A IGURE DDING EVICE DVERTISEMENT OWNLOAD UNCTION Confidential and Proprietary Information of ZTE CORPORATION... -
Page 45: Figure 42 Adding Node Device
The items available in Function is defined in Nodal function type in the Add node page by clicking add in the Node man- agement page (this page is opened by clicking System Re- source > Node ) . Confidential and Proprietary Information of ZTE CORPORATION... -
Page 46: Table 10 Node Device Parameters
Otherwise, only the default network can be selected. Internet Input the Internet Set the bandwidth according to the capability of bandwidth bandwidth for the service the network adapter. (Mbps) device server. For example: 4000. Confidential and Proprietary Information of ZTE CORPORATION... - Page 47 10 digits with at most 2 decimal digits. Normally, it is set to 800. RTSP Port Input the RTSP port No. Input the RTSP port No. according to the actual for the service device. application. For example: 554. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 48: Modifying Node Device
1. Click System Resource > Node Device. 2. Query the node device to be modified. 3. Click the modify link at the line of the selected node device to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 49: Deleting Node Device
2. Query the node device to be deleted. 3. Click the remove link at the line of the selected node device and then in the pop-up confirmation box click the OK button. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 50: Uss Device Management
Adding USS Device Context Only one USS device can be added under one POP unit. Steps 1. Click System Resource > USS Device. 2. Click add to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 51: Modifying Uss Device
USS server. 4. Click Confirm to save the settings. ND OF STEPS Modifying USS Device Steps 1. Click System Resource > USS Device. 2. Query the USS device to be modified. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 52: Deleting Uss Device
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 53: Adding Epg Device
1. Click System Resource > EPG Device. 2. Click add to open the Web page shown below. 50 A EPG D IGURE DDING EVICE 3. Set the parameters according to the descriptions in the follow- ing table. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 54: Modifying Epg Device
1. Click System Resource > EPG Device. 2. Query the EPG device to be modified. 3. Click the modify link at the line of the selected EPG device to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 55: Deleting Epg Device
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 56: Querying Uss Unit Performance
NFORMATION OF ERFORMANCE ND OF STEPS Querying USS Unit Performance Steps 1. Click System Resource > USS Unit Performance Query. 2. Specify the query conditions such as Node name or POP unit name. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 57: Figure 54 Querying Uss Unit Performance
3. Click the query button to get the query result, as shown below. 54 Q USS U IGURE UERYING ERFORMANCE 4. Click the EXCEL button to export the query result to an Excel file. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... - Page 58 ZXBIV IPTV MDP Operation Manual This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 59: Vcdn Management
If no parameter specified for a query condition option, this op- tion will not be used as a filtering condition for the query result. Therefore, all of the VCDN information will be queried. To reset the query conditions, click the Reset button. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 60: Vcdn Node Management
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 61: Viewing Vcdn Node
If no parameter specified for a query condition option, this op- tion will not be used as a filtering condition for the query result. To reset the query conditions, click the Reset button. 3. Click the query button to get the query result. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 62: Figure 58 Adding Vcdn Node
1 node, then this node must be non-central node. if public Whether to set this VCDN If this node is central node, select yes or no according central node as the public central to the actual situation. node. node Confidential and Proprietary Information of ZTE CORPORATION... -
Page 63: Modifying Vcdn Node
2. Input the name of the VCDN node in the VCDN node name text box and then click query. 3. Click the VCDN node to be canceled. 4. Click the cancel link at the line of the selected VCDN node. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 64: Node Dependence Management
It is required that the VCDN has been created and there are at least two VCDN nodes created. Steps 1. Click VCDN > Node Associate. 2. Click Edit to open the Web page shown below. 61 E IGURE DITING EPENDENCE Confidential and Proprietary Information of ZTE CORPORATION... -
Page 65: Figure 62 Editing Node Dependence-2
Set the priority value in the Priority pane: 0 ~ 10 (0 stands for the highest priority). iii. Click Add in the Operation pane to add the selected node to the Depended list. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 66: Deleting Node Dependence
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result, as shown below. 63 Q IP S IGURE UERYING EGMENT ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 67: Adding Ip Segment
64 IP S IGURE EGMENT ANAGEMENT Querying IP Segment Steps 1. Click VCDN > IP Segment Task. 2. Specify the query conditions such as VCDN name, Node name, Start IP, End IP and Network name. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 68: Importing To Excel
EXCEL file. ND OF STEPS Synchronize IP Segment Information Steps 1. Click VCDN > IP Segment Task. 2. Specify the query conditions. 3. Click the query button to get the query result. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 69: Distributing Execution Command
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result. 4. Click remove at the Operation column of the selected IP seg- ment information. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 70: Content Management
If no parameter specified for a query condition option, this op- tion will not be used as a filtering condition for the query result. To reset the query conditions, click the Reset button. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 71: Copying Vcdn Content
2. Query the content to be deleted. 3. Click the remove link at the line of the selected content and then in the pop-up confirmation box click the OK button. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 72: Querying Live Source Content Text
To reset the query conditions, click the Reset button. 3. Click the Query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 73: Adding Publish Policy
ND OF STEPS Managing Publish Policy Steps 1. Click VCDN > Publish Policy. 2. Query the policies. 3. Select a policy and then click the Manage link to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 74: Deleting Publish Policy
1. Click VCDN > Publish Policy. 2. Query the policy and then click the remove link at the line of the selected policy to open the confirmation box. 3. Click OK to delete the policy. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 75: Task Management
74 Q IGURE UERYING ECORDING ND OF STEPS Querying Content Dispatch Task Context Users can query the information of the content dispatch tasks. Content dispatch tasks are generated from the following pro- cesses: Confidential and Proprietary Information of ZTE CORPORATION... -
Page 76: Querying Content Distribution Task
To reset the query conditions, click the Reset button. 3. Click the query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 77: Figure 76 Querying Content Distribution Task
Chapter 4 Task Management 76 Q IGURE UERYING ONTENT ISTRIBUTION ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... - Page 78 ZXBIV IPTV MDP Operation Manual This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 79: Channel Management
EXCEL button and the users can down- load the Excel file to local to edit it. 3. Click the query button to get the query result, as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 80: Viewing Live Channel
3. Click the query button to get the query result. 4. Click the View link at the line of the selected channel to check the detailed information, as shown below. 78 C IGURE HECKING HANNEL NFORMATION ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 81: Adding Live Channel
Channel Input a channel ID. When select yes in Whether to manually set the channelid, input a channel ID. Channel Input the new channel For example, CCTV. name name. Confidential and Proprietary Information of ZTE CORPORATION... - Page 82 Input the port No. of The port No. should be an even number greater than stream the RTP stream. There 7980. port X are two categories of RTP stream, audio stream and video stream. Confidential and Proprietary Information of ZTE CORPORATION...
- Page 83 FEC cod- program, you upload ing pa- an SDP file in this rameters item. Channel Input the description Channel description text should not exceed 255 bytes. descrip- of the channel. tion Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 84: Figure 80 Adding Live Channel (Common Node)
Channel Input a channel ID. When select yes in Whether to manually set the channelid, input a channel ID. Channel Input the new For example, CCTV. name channel name. Confidential and Proprietary Information of ZTE CORPORATION... - Page 85 TTL to 64. Number Input the number Usually, of RTP of the RTP stream 1 for TS H264; � stream ports corresponding ports to the coding type. 2 for ISMA MPEG4. � Confidential and Proprietary Information of ZTE CORPORATION...
- Page 86 � SDP content � Multicast URL � MVS SDP content � MVS RTSP-URL � Note: MVS SDP content and MVS RTSP-URL are only available when the channel type is selected as Live MVS. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 87: Modifying Live Channel
2. Click the Modify link at the line of the selected channel to open the Web page shown below. 81 M IGURE ODIFYING HANNEL 3. Modify the channel parameters as required. 4. Click Confirm to save the settings. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 88: Deleting Live Channel
Make sure that the program file filled in the File name of the default program text box exists on the VCDN node. 4. Click Confirm to save the settings. ND OF STEPS Adding Relay Steps 1. Click Channel > Channel. 2. Query the channels. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 89: Figure 83 Adding Relay
USS device can be selected from the left relay tree. 84 A IGURE DDING ELAY INGLE OURCE INGLE OINT 85 A POP) IGURE DDING ELAY ATCH Confidential and Proprietary Information of ZTE CORPORATION... -
Page 90: Figure 86 Adding Relay (Batch Uss)
Select the POP unit for the Select the POP unit from the drop-down list. name channel relay. Note: The POP unit must have already be created. Otherwise, no options in the pull-down list. Confidential and Proprietary Information of ZTE CORPORATION... - Page 91 For multicast, the user shall set � sets TTL to 1. ZMSSCC/LocalIP_Private parameter (IP address of private network port) to For multicast mode, � specify the network port for multicast system automatically transmission. sets TTL to 64. Confidential and Proprietary Information of ZTE CORPORATION...
- Page 92 FEC redundancy coding for the redundancy code stream from USS to coding for MDU. live program Channel Input the description of the Channel description text should not exceed 255 description bytes. channel. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 93: Table 18 Parameters Of Batch Uss Relay
Note: The value ranges from 30 to 10080 TVOD minutes. Hold time (min) Channel Select a channel recording Recording type according to the actual Type situation. Multicast Input the multicast address. Refer to Table address Confidential and Proprietary Information of ZTE CORPORATION... - Page 94 Select yes or no according to actual situation. use RTP encapsu- lation 6. Click Confirm or Add to task list to submit the configuration. Caution: The parameters items may vary by selecting different nodes. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 95: Batch Single Point Relay To Excel
1. Click Channel > Channel. 2. Query the channels. 3. Select the channels of USS node which need modifying and click Batch modification to task list to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 96: Channel Task Management
To reset the query conditions, click the Reset button. 3. Click the Query button and the query result is shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 97: Modifying Channel Task
2. Click Import to EXCEL to open the Web page shown below. 90 I EXCEL IGURE MPORTING 3. Click the EXCEL File link to download Excel template to local and fill in related parameters. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 98: Executing Channel Task
ND OF STEPS Recording Management Recording management includes querying, adding, deleting and editing channel recording tasks. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 99: Querying Recording
UERYING ECORDING ND OF STEPS Adding Recording Steps 1. Click Channel > Record. 2. Specify VCDN name, Node name, POP unit name and Channel name. 3. Click the add button. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 100: Deleting Recording
92 A IGURE DDING ATCH HANNEL ECORDING 4. In the relay tree of POP channel, select a node, POP unit and channel, and then click Batch adding to submit the settings. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 101: Policy Management
To reset the query conditions, click the Reset button. 3. Click the Query button to get the query result, as shown below. 93 Q IGURE UERYING OLICY ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 102: Adding Policy
1. Click Policy > Policy. 2. Search the policy to be deleted. 3. Click Remove at the line of the selected policy and then in the pop-up confirmation box click OK. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 103: Policy Application Management
2. Select VCDN name, Policy type, Node name and Policy name. 3. Click the add button. ND OF STEPS Deleting Policy Application Steps 1. Click Policy > Policy Apply. 2. Query the policy application to be deleted. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 104: Vod Push Policy Management
1. Click Policy > VOD Push Policy. 2. Click add to open the Web page shown below. 97 A IGURE DDING ONTENT OLICY 3. Select VCDN name, Source node, Target node and input Push count everytime. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 105: Modifying Content Push Policy
ND OF STEPS Hot Content Push Management Querying Hot Content Push Policy Steps 1. Click Policy > Hot Content Push. 2. Specify query conditions such as VCDN name, Source node and Target node. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 106: Adding Hot Content Push Policy
Modifying Hot Content Push Policy Steps 1. Click Policy > Hot Content Push. 2. Refer to the section of "Modifying Content Push Policy" for the detailed information of the following steps. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 107: Deleting Hot Content Push Policy
2. Click Add to open the Web page shown below. 101 A IGURE DDING ONTENT OLICY 3. Select VCDN name, Source node, Target node and input Push count everytime. 4. Click Confirm to save the settings. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 108: Modifying New Content Push Policy
1. Click Policy > New Content Push. 2. Query the policy to be deleted. 3. Click Remove at the line of the selected policy and then in the pop-up confirmation box click OK. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 109: Authority Management
Context The system administrator can add lower level operators. Steps 1. Click Purview > Operator, as shown below. 102 O IGURE PERATOR ANAGEMENT 2. Click Add to open the Web page shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 110: Figure 103 Adding Operator
Input the description of the operator. Password/Pass- Input the account password for the new operator. word Confirm The strength of the new password will be shown with different colors. Type Only System Operator is available. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 111: Modifying Operator Property
Property button becomes available. The current login opera- tor is listed at the bottom of the operator list with a * mark. 3. Click the Property button to open the Web page shown below. 104 M IGURE ODIFYING PERATOR ROPERTY Confidential and Proprietary Information of ZTE CORPORATION... -
Page 112: Setting Operator Type
1. Click Purview > Operator. 2. Search the operator to be deleted and then click it. 3. Click the Delete button and then in the pop-up confirmation box click the OK button. ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... -
Page 113: Performing Operator Sign-Out
While an operator cannot assign authority to itself. Steps 1. Click Purview > Operator Power to open the Web page shown below. 106 C IGURE ONFIGURING PERATOR UTHORITY Confidential and Proprietary Information of ZTE CORPORATION... -
Page 114: Operator Group Management
Adding Operator Group Context The operator's authority is achieved from the operator group to which it belongs. Steps 1. Click Purview > Operator Group. 2. Click Add. 3. Input the Group Name as shown below. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 115: Modifying Operator Group
4. Modify the group name as required. 5. Click Apply to save the settings. ND OF STEPS Deleting Operator Group Steps 1. Click Purview > Operator Group. 2. Click the operator group to be deleted. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 116: Configuring Operator Group Authority
After the administrator login, only the menus of the operation rights assigned here can be viewed. 108 C IGURE ONFIGURING PERATOR ROUP UTHORITY 5. Repeat step 3 and step 4 to assign other operation rights. Confidential and Proprietary Information of ZTE CORPORATION... -
Page 117: Searching Operator Log
2. Specify the query conditions such as Operator, Operation type, Start Time (mandatory) and End Time (mandatory). 3. Click the Search button to get the search result, as shown below. 109 S IGURE EARCHING PERATOR ND OF STEPS Confidential and Proprietary Information of ZTE CORPORATION... - Page 118 ZXBIV IPTV MDP Operation Manual This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 119: Figures
Figure 30 Modifying POP Unit ..........26 Figure 31 Querying USS Unit FTP.........27 Figure 32 Checking Detailed Information of USS Unit FTP..28 Figure 33 Adding USS Unit FTP ..........28 Figure 34 Modifying USS Unit FTP ........29 Confidential and Proprietary Information of ZTE CORPORATION... - Page 120 Figure 67 Querying VCDN Content ........60 Figure 68 Checking Detailed VCDN Content Information..61 Figure 69 Copying VCDN Content.........61 Figure 70 Querying Live Source Content Text ......62 Figure 71 Querying Appointed Release........63 Figure 72 Adding Appointed Release........63 Confidential and Proprietary Information of ZTE CORPORATION...
- Page 121 Figure 105 Setting Operator Type ........102 Figure 106 Configuring Operator Authority ......103 Figure 107 Adding Operator Group........105 Figure 108 Configuring Operator Group Authority....106 Figure 109 Searching Operator Log ........107 Confidential and Proprietary Information of ZTE CORPORATION...
- Page 122 ZXBIV IPTV MDP Operation Manual This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 123: Tables
Table 16 Live Channel Parameter (Common Node) ....74 Table 17 Parameters of Single Source Single Point Relay ..80 Table 18 Parameters of Batch USS Relay.......83 Table 19 Policy Parameters ..........92 Table 20 Operator Parameters ........... 100 Confidential and Proprietary Information of ZTE CORPORATION... - Page 124 ZXBIV IPTV MDP Operation Manual This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...
-
Page 125: Glossary
- Real-time Transport Protocol RTSP - Real-Time Streaming Protocol - Set Top Box - Transfer Control Protocol VCDN - Virtual Content Distribution Network - Video On Demand WLAN - Wireless Local Area Network Confidential and Proprietary Information of ZTE CORPORATION...