Zte ZXV10 H100 User Manual page 36

ZXV10 H100 Home Gateway User Manual (Draft)
If you need to modify an existing route, select it in the route list. Its configuration is
shown in the set box. Modify the next hop IP address and click the <Modify> button.
If you need to delete an existing route, select it and click the <Delete> button. After
that, the route list is refreshed.
4.2.4 RIP Dynamic Route
Click the [RIP] tab in the main route configuration interface to enter the configuration
interface of the dynamic route protocol RIP, as shown below. The main RIP
configuration interface shows the route table information of the system.
4-12