ZXV10 H100 Home Gateway User Manual (Draft)
nas interface in the interface.
4.2.2.2 PPPoE Connection
If you want to implement the PPPoE dial-up connection through the H100, a PPPoE
connection must be set up. Upon configuration of the ATM-related parameters, select
the button in front of PPPoE to configure the related parameters of the PPPoE
connection.
Nas Interface No.
Encapsulation Type
Username&Password
Authentication type
Idle Time
Generated 2684 bridge interface No., value range: 0-9.
Packet encapsulation type, value range: LLC/VC.
PPPoE user name and password to be authenticated.
Authentication protocol type, value range: PAP/CHAP.
The PPPOE connection should be disconnected after
4-6