Zte ZXV10 H11X User Manual
  1. Manuals
  2. Brands
  3. Zte Manuals
  4. Gateway
  5. ZXV10 H11X
  6. User manual
Zte ZXV10 H11X User Manual

Zte ZXV10 H11X User Manual

Home gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

ZXV10 H11X
Home Gateway
User's Manual
Version 1.0
ZTE CORPORATION
ZTE Plaza, Keji Road South,
Hi-Tech Industrial Park,
Nanshan District, Shenzhen,
P. R. China
518057
Tel: (86) 755 26771900
800-9830-9830
Fax: (86) 755 26772236
URL: http://support.zte.com.cn
E-mail: doc@zte.com.cn

Advertisement

Table of Contents
loading

Related Manuals for Zte ZXV10 H11X

Summary of Contents for Zte ZXV10 H11X

  • Page 1 ZXV10 H11X Home Gateway User’s Manual Version 1.0 ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District, Shenzhen, P. R. China 518057 Tel: (86) 755 26771900 800-9830-9830 Fax: (86) 755 26772236 URL: http://support.zte.com.cn E-mail: doc@zte.com.cn...

  • Page 2: Revision History

    The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
  • Page 3 Please fill out the following questionnaire and fax to: (86) 755-26772236; Or mail to: Publications R&D Department, ZTE CORPORATION, ZTE Plaza, A Wing, Keji Road South, Hi-Tech Industrial Park, Shenzhen, P. R. China 518057. Thank you for your cooperation!
  • Page 4 Your Comments & Suggestions Document ZXV10 H11X (V1.0) Home Gateway User’s Manual Name Product Document V1.0 R1.0 Version Revision Number Equipment Installation Date Presentation: (Introductions, Procedures, Illustrations, Completeness, Level of Detail, Organization, Appearance) Good Fair Average Poor Your Accessibility: evaluation of...

  • Page 5: Table Of Contents

    Contents About this User’s Manual............xi Typographical Conventions ...............xi Mouse Operation Conventions............xii Safety Signs .................. xiii How to Get in Touch............... xiv Customer Support ..................xiv Documentation Support ................xiv Chapter ................15 Product Profile ..............15 Product Overview................15 Packing List ..................15 Product Features................16 Product Appearance ................17 System Requirements ..............20...
  • Page 6 Basic Configuration of Wireless Network ............40 Wireless Network Sub-interface Configuration..........41 WAN Connection Configuration............47 Configuring Bridge Connection ..............49 Configuring PPPoE Connection..............51 Configuring Static Connection ..............53 Configuring DHCP Connection ..............55 Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 7 SNMP Configuration ................71 TR069 Configuration ...............73 Chapter ................75 Security Configuration............75 Firewall By-level Control and SPI ............75 Port Forwarding ................77 Port Trigger ..................78 Remote Access Control..............81 DMZ ....................83 Filter ....................84 Setting Bridge Filter ..................84 Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 8 Route Select Configuration.............112 Service Configuration ..............114 Service Configuration Display............115 Bluetooth MAC Address Configuration ..........116 Chapter ................ 117 Other Operation Tools............117 System Commands...............117 Network Continuity Test Tool: PING..........118 User Management.................119 Update Gateway ................120 Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 9 Step2 SIP Protocol Configuration ..............130 Step 3 Check Port Status................131 Step 4 Save Configuration................131 MGCP Typical Configuration ............132 Step1 Select Protocol Type.................132 Step 2 Configure MGCP Protocol ..............133 Step 3 Check Port Status................134 Step 4 Save Configuration................134 Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 10 Appendix ..............135 Solutions to Common Problems........135 Appendix ..............139 Terms ................. 139 Tables................. 147 Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 11: About This User's Manual

    About this User’s Manual Typographical Conventions ZTE documents employ the following typographical conventions. A B L E Y P O G R A P H I C A L O N V E N T I O N S Typeface...

  • Page 12: Mouse Operation Conventions

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Mouse Operation Conventions A B L E O U S E P E R A T I O N O N V E N T I O N S Typeface Meaning Click Refers to clicking the primary mouse button (usually the left mouse button) once.

  • Page 13: Safety Signs

    Electrostatic: The device may be sensitive to static electricity. Microwave: Beware of strong electromagnetic field. Laser: Beware of strong laser beam. No flammables: No flammables can be stored. No touching: Do not touch. No smoking: Smoking is forbidden. Confidential and Proprietary Information of ZTE CORPORATION xiii...

  • Page 14: How To Get In Touch

    You can also call our customer support center at (86) 755 26771900 and (86) 800-9830-9830. Documentation Support ZTE welcomes your comments and suggestions on the quality and usefulness of this document. For further questions, comments, or suggestions on the documentation, you can contact us by e-mail at doc@zte.com.cn;...

  • Page 15: Product Profile

    C h a p t e r Product Profile Product Overview Thank you for choosing the ZXV10 H11X home gateway product of ZTE CORPORATION. The ZXV10 H11X home gateway is a modular access gateway in the center of a home network. It links multiple devices through Internet connections and provides users with safe communication, entertainment and storage functions.

  • Page 16: Product Features

    ZXV10 H11X (V1.0)Home Gateway User’s Manual RJ-11 telephone cable USB connection cable Manual and Toolkit CD Home Gateway Installation Guide Please contact your dealer if any of the above components is wrong, missing or damaged, and properly keep the package and existing components of the product for replacement requirements.

  • Page 17: Product Appearance

    Indicator Status Description Red indicator always on Power-on self-test failure Fault indicator The device is powered on and the Green indicator always on version is being loaded/upgraded RUN indicator Power off Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 18: Back Panel

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Indicator Status Description equipment normal Green flashing operation. Green indicator always on Physics link connection are normal The device is powered off/the network cable is unconnected. WAN indicator Flashing according to the network Green indicator flashing...

  • Page 19: Side Panel

    (all the four indicators of the LAN port will be lit after restart). Side panel The side panel provides two RJ-45 LAN network interfaces, one USB Slave interface, USB Host interface and one CardBus interface. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 20: System Requirements

    ZXV10 H11X (V1.0)Home Gateway User’s Manual System Requirements Support of ISP is required. You should be able to get the service from an ISP via WAN access. If necessary, an Ethernet hub and some Ethernet cables can be added to construct a small/medium-sized Intranet.

  • Page 21: System Connections

    C h a p t e r System Connections System Application Environment The main application scenario of the ZXV10 H11X home gateway is shown below: ZXV10 H11X Hardware Connection Connecting LAN Network Interface Connect the LAN network interface of the H110 to the network...
  • Page 22 ZXV10 H11X (V1.0)Home Gateway User’s Manual straight-through Ethernet cable. You can also connect the H110 or the PC through the WLAN radio frequency signal line or USB cable. Connect the local network via an Ethernet cable. The four LAN interfaces of the H110 can auto-negotiate the connection speed of the 10 Mbps/100 Mbps Ethernet and the half-duplex/full-duplex transmission mode.

  • Page 23: Connecting Wan (Ethernet) Network Interface

    H110 is Please use the power adapter provided by Warning: ZTE. Using of the wrong power adapter may cause damages to the device. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 25: Preparations For Configuration

    If your PC has not yet been installed with TCP/IP, just install it in the following steps. Let us take the Ethernet interface under Local Connection in the Windows 2000 system for an example. Click Start, select Settings, and then click Network and Dial- up Connections. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 26 ZXV10 H11X (V1.0)Home Gateway User’s Manual Double click the Local Connections icon and then click the Properties Properties button in the Local Area Connection window. Click the Install button and then double click the Protocol icon. Select Internet protocol (TCP/IP) and then click OK to finish the protocol installation.

  • Page 27: Configuring Tcp/Ip

    IP address” option to configure it. Follow the steps below: Double click the Local Connections icon, and then select Internet protocol (TCP/IP) from the Local Area Connection Properties window. Then, click the Properties button. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 28 ZXV10 H11X (V1.0)Home Gateway User’s Manual In the Internet Protocol (TCP/IP) Properties dialog box, click the Use the following IP address check box, specify the local IP address in the same network segment with the LAN interface address of the H110, that is, 192.168.1.x (x is in the range of 2~254).

  • Page 29: Checking Configuration

    It indicates that the PC has been successfully connected to the H110. If the following information occurs: Pinging 192.168.1.1 with 32 bytes of data: Request timed out. It indicates an error occurs in the installation. Please check the following items in turn: Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 30: Login

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Whether the Ethernet cable between the H110 and your PC has been correctly connected Whether the network adapter driver on your PC is correctly installed Whether the indicators of the LAN interfaces on the...

  • Page 31: General Functions

    Tools and Status tab pages. It also displays the basic status information of the device, including the system software version number, version date, system uptime, registration status of VOIP account, ext. number, Bluetooth number and WAN link status. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 32 ZXV10 H11X (V1.0)Home Gateway User’s Manual Click the Log Out button at the right upper corner on the interface to exit user login and return to the login page. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 33 Chapter 3 - Preparations for Configuration This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 35: Basic Configuration

    Click the LAN Configuration link on the left part of the page to enter the LAN interface configuration page, where you can configure the related information of four LAN interfaces of the H110. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 36: Langroup Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual You can click the Save button at the right Note: upper corner on the page to save the current configuration information. ensure configuration information will not be lost after powering off, it must be saved. Click Log Out button at the right upper corner on the interface to exit user login and return to the login page.
  • Page 37 IP subnet mask allocated by the DHCP Server Gateway Gateway IP address used by the DHCP client Domain Domain name used for DHCP management Domain name server address NTP Server Address of the NTP server Lease Time Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 38: Dhcp Client List

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Lease time (Unit: day), which is the time during which the DHCP server leases the IP address Using DHCP Relay Enabling/disabling the DHCP relay service Server IP IP address of the DHCP Server Uplink interface connection...

  • Page 39: Dhcp Binding Configuration

    DHCP Server will allocate the IP address to the host corresponding to this MAC address. The IP address must belong to the address pool Note: provided by the DHCP Server of this LAN group. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 40: Wlan Interface Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual WLAN Interface Configuration For WLAN interface configuration, refer to the Basic Configuration of Wireless Network in Basic Configuration of Wireless Network. Wireless Network Configuration Basic Configuration of Wireless Network Click the Wireless link on the left part of the interface to enter the...

  • Page 41: Wireless Network Sub-Interface Configuration

    1. Basic information display of wireless network sub-interface After entering the configuration page of wireless network sub-interface, click the Basic link at the upper part of the Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 42 ZXV10 H11X (V1.0)Home Gateway User’s Manual page to enter the basic information page of wireless network sub-interface, which displays the ESSID and status information of the corresponding wireless network sub-interface. 2. Security setting for wireless network sub-interface After entering the configuration page of wireless network...
  • Page 43 Select format (Hexadecimal alphanumeric) corresponding to the key, and configure key values (Key1~Key4) for WEP encryption, and select one for configuration. Select the authentication mode between wireless devices: Shared Key or Open System. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 44 ZXV10 H11X (V1.0)Home Gateway User’s Manual WPA encryption You can select the encryption algorithm: TKIP, AES or Auto. You can set the multicast key update interval: Group Key Interval. Select the PSK mode encryption (without authentications) or 802.1x authentication encryption. For the PSK mode,...
  • Page 45 WLAN Station MAC address filtering rule and check the information of all the WLAN Stations associated with this wireless network sub-interface. Configuring MAC address filtering rule You can set the MAC address-based access mode to control the connected Station. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 46 ZXV10 H11X (V1.0)Home Gateway User’s Manual Allow: Allowing the following MAC address associations Ban: Banning the following MAC address associations Disable Access List: Not enabling this function MAC Address: MAC address to be controlled Note: It only functions for the unassociated Station, but not the associated Station.

  • Page 47: Wan Connection Configuration

    VLAN label and priority field to identify different services and priorities. The following examples of PPPoE connection describe the WAN connection configuration pages when support single connection or multi-connection is enabled. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 48 ZXV10 H11X (V1.0)Home Gateway User’s Manual The WAN Connection page includes areas A, B and C. Area A is used to configure the global parameters for the WAN connection. Area B configures the compulsory parameters for any type of WAN connection. Area C configures specific parameters for different types of WANs.

  • Page 49: Configuring Bridge Connection

    Click the WAN Connection link on the left part of the WEB page and select Bridge in the Type box to configure the bridge The configuration window when the multiple WAN connection. connections or single connection is enabled is as shown below. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 50: Connection Type

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Name Connection name Type Connection type VLAN ID VLAN label in the Ethernet packets on the WAN interface, used only for multiple WAN connections. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 51: Configuring Pppoe Connection

    Click the WAN Connection link on the left part of the WEB page and select PPPoE in the Type box to configure the PPPoE The configuration window when the multiple WAN connection. connections or single connection is enabled is as shown below. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 52: Authentication Type

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Name Connection name Type Connection type Enabling/disabling NAT VLAN ID VLAN label in the Ethernet packets on the WAN interface, used only for multiple WAN connections. Range: 1~4094. Priority Priority of processing, used only for multiple WAN connections.

  • Page 53: Configuring Static Connection

    Click the WAN Connection link on the left part of the WEB page and select Static in the Type box to configure the Static connection. The configuration window when the multiple WAN connections or single connection is enabled is as shown below. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 54: Default Gateway

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Name Connection name Type Connection type Enabling/disabling NAT VLAN ID VLAN label in the Ethernet packets on the WAN interface, used only for multiple WAN connections. Priority Priority of processing, used only for multiple WAN connections.

  • Page 55: Configuring Dhcp Connection

    Click the WAN Connection link on the left part of the WEB page and select DHCP in the Type box to configure the DHCP connection. The configuration window when the multiple WAN connections or single connection is enabled is as shown below. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 56 ZXV10 H11X (V1.0)Home Gateway User’s Manual Name Connection name Type Connection type Enabling/disabling NAT VLAN ID VLAN label in the Ethernet packets on the WAN interface, used only for multiple WAN connections. Priority Priority of processing, used only for multiple WAN connections.

  • Page 57: Advanced Configuration

    This means that one device can dynamically join a certain network, obtain an IP address, report its own functions and learn the existence and functions of the other devices. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 58: Static Route And Dynamic Route Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Enable UPnP Enabling switch the UPnP function WAN Connection Selecting the WAN side connection interface LAN Connection Selecting the LAN side interface Static Route and Dynamic Route Configuration Click the Route link at the left side of the page to enter the route configuration page of the H110, which is used to configure static route and RIP dynamic route.
  • Page 59 IP address and click the Modify button. To delete an existing route entry, select it from the displayed route list, and then click the Delete button. The route is deleted, and the route list is refreshed again. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 60: Rip Dynamic Route

    ZXV10 H11X (V1.0)Home Gateway User’s Manual RIP Dynamic Route Click the RIP link in the Routing Setup page to enter the configuration page of the dynamic routing protocol RIP, where the route table information of the system is shown. To enable the RIP function of the H110, select Enable RIP. Then, you can configure the Version and Interface parameters.

  • Page 61: Ddns Configuration

    3600 s (1 hour) to 86400 s (24 hours) DDNS Configuration Click the DDNS link on the left part of the WEB page to enter the DDNS Setup page, where the user can select whether to enable DDNS service. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 62 ZXV10 H11X (V1.0)Home Gateway User’s Manual The DDNS (Dynamic Domain Name System) can be used to enable the host with a dynamic IP address to provide the domain name service. For example, suppose the host dynamically obtains an IP address via xdsl dialup or via the DHCP server and externally provides the domain name service.

  • Page 63: Wan Connection

    Both of the above protocols should apply for a registration account from its own service provider to get such information as the username and password. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 64: Dns Server Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual DNS Server Configuration Click the DNS Service link on the left part of the WEB page to enter DNS Configuration page, where you can configure static DNS record. Domain Name Domain name Host Name...

  • Page 65: Setting Igmp Proxy

    Selecting the WAN side connection interface Setting IGMP Snooping The IGMP Snooping function monitors and filters to control multicast data forwarding at L2 of the network. Enable IGMP Snooping Enabling the IGMP Snooping function Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 66: Bluetooth Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Bluetooth Configuration Click the Bluetooth link on the left part of the page to enter the Bluetooth configuration page. In this page, you can configure the Identity of the H110 Bluetooth interface and decide whether to enable the Personal Area Network (PAN) service of the Bluetooth interface.

  • Page 67: Ipqos Configuration

    WAN Connection Selecting a WAN connection as the egress interface bound with the IPQoS Enable IPQoS Enabling switch for IPQoS Link Speed Uplink bandwidth of the WAN connection in the unit of kbps Borrow Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 68 ZXV10 H11X (V1.0)Home Gateway User’s Manual Whether to allow borrowing bandwidth from other idle queues; Yes/No: allowing borrowing/barring borrowing Whether to enable the RED (Random Early Detection) algorithm; Yes/No: Enable/disable Default/Low/Medium/High/Critical/Realtime/Prem ium/ Urgent They correspond to eight different priority queues. Default is the lowest priority, and Urgent is the highest priority.
  • Page 69 Source port of data flow; the configuration format of this item can be xx or xx: xx. Destination Port Destination port of data flow; the configuration format of this item can be xx or xx: xx. Interface In-interface of the data flow Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 70: Ingress Rate Limit Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Outer face Out-interface of the data flow DSCP DSCP value of data flow, in the range of 0~69 Set Mark Whether to set mark for the data flow Priority Priority of the data flow...

  • Page 71: Snmp Configuration

    As the Simple Network Management Protocol widely adopted on Internet, SNMP is set up over the UDP in TCP/IP protocol cluster to manage the network through the highly efficient NMS, provide wireless connection service, and timely report and handle network Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 72 ZXV10 H11X (V1.0)Home Gateway User’s Manual faults. Click the SNMP link on the left of the WEB page to enter the SNMP Configuration page, where you can set the SNMP read/write community string, enable or disable the SNMP Agent of the H110 and set the information such as Trap address.

  • Page 73: Tr069 Configuration

    TR069 Configuration Click the TR069 link on the left part of the Web page to enter the TR069 Configurations page, where you can configure URL and account for connection of CPE and ACS. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 74 ZXV10 H11X (V1.0)Home Gateway User’s Manual ACS URL ACS URL address Username ACS username Password ASC password CPE URL CPE URL address Username CPE username Password CPE password Default WAN Default WAN connection Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 75: Security Configuration

    Click the General link on the left part of the interface to enter the firewall by-level control and SPI setting page, where the user can configure the firewall security level and whether to enable the status packet check accelerating function. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 76 ZXV10 H11X (V1.0)Home Gateway User’s Manual High The firewall level is high. In this case, only the external access defined by the port mapping rule and access control rule can pass, the inner network is allowed to access the outer network, and the anti-attack function is also enabled.

  • Page 77: Port Forwarding

    WAN to access the server of the LAN as the client. Enable Port Forwarding Enabling the port forwarding function Name Name of port forwarding Protocol Selecting the protocol name; The options are TCP and UDP. WAN Connection Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 78: Port Trigger

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Corresponding to the established WAN connection WAN Port Range Destination port range of the WAN side LAN IP Address IP address of the LAN side LAN Port Corresponding port of the LAN side For example, you can configure a port forwarding entry with PPPOE...
  • Page 79 Displaying the protocol of forwarding connection Open Start Displaying the port where forwarding connection starts Open End Displaying the port where forwarding connection ends Status Displaying the status of the current trigger application Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 80 ZXV10 H11X (V1.0)Home Gateway User’s Manual Action Configuration button used to validate or cancel the current application Adding a group of trigger application configurations Modify Modifying the current trigger application configuration Delete Deleting the current trigger application configuration Reset Restoring the current trigger connection to the ex-factory...

  • Page 81: Remote Access Control

    H110. Services of the H110 refer to TELNET, FTP, SNMP, HTTPS and HTTP. The control does not act on the ping operation. At most 16 IP address entries can be configured for access control. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 82 ZXV10 H11X (V1.0)Home Gateway User’s Manual Enable WAN Access Enabling the host of the WAN to access the services of the H110 Mode Selecting black list or white list IP address of the host subject to access control The default setting only allows hosts at the LAN side to access services of the H110.

  • Page 83: Dmz

    FTP service of the H110 to the FTP or WEB server in the DMZ zone. Enable DMZ Enabling DMZ host selection LAN side access connection IP address setting of the DMZ host Mask Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 84: Filter

    ZXV10 H11X (V1.0)Home Gateway User’s Manual If you have set the IP address of a certain network segment of the LAN to the DMZ zone, you must set the corresponding subnet mask here. For example, you can set host 192.168.1.5 as a host of the DMZ zone.

  • Page 85: Setting Ip Filter

    IP address of the ingress interface of the H110 as the source and the IP address of the egress interface as the destination. At most 16 IP filter entries can be configured. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 86 ZXV10 H11X (V1.0)Home Gateway User’s Manual Enable IP Filter Enabling the IP filter function Name Name of the IP filter Protocol Selecting name of the protocol; The options are ANY (which indicates any protocol), TCP, UDP and ICMP. Source IP Address...

  • Page 87: Setting Url And Web Filter

    Filtering Policy parts used to set rule (validation condition) and policy (filter condition) respectively and filter HTTP request for the Web server by any client. At most 100 rule/policy entries can be configured. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 88: Filtering Policy

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Filtering Policy Used to configure policy, so the user can decide policy validation condition Filtering Rule Used to configure rule, so the user can set Web filter condition Adding policy or project Modify Modifying the current selected policy or project...
  • Page 89 Rule to enter the policy property interface. Rule Name Name of the current policy Description Description of the current policy URL Key Specifying a list of URL keywords separated by spaces, For example: EDU MOVIE Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 90 ZXV10 H11X (V1.0)Home Gateway User’s Manual Data Key Specifying a list of Data keywords separated by spaces, For example: EDU MOVIE Submit Completing the current modifying or adding operation Back Canceling the current modifying operation 2. After configuring the policy, the user can return to the main interface and click the Add or Modify button of Filtering Policy to enter the project property interface.
  • Page 91 Schedule option will appear automatically. Please select a date Setting the validating time for the current project, for example: Mon, Tue or Wed Start Selecting the project start time Selecting the project end time Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 92: Ipsec Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual IPSec Configuration Setting RSA Key Click the IPSec link on the left part of the WEB page to enter the IPSec page, where you can check and update the RSA key adopted at IPSec security negotiation.

  • Page 93: Adding New Connection

    IPSec security connection. IPSec security connection parameters fall into three categories: general configuration (General security property configuration (IPSec) and negotiation property configuration IPSec Automatic/IPSec Manual Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 94 ZXV10 H11X (V1.0)Home Gateway User’s Manual 1. General (general configuration) Connection Name IPSec security connection name; Please use A-Z/a-z/0-9 and underline _ with a length limited within 20 characters, and try to select a name related with its actual meaning.
  • Page 95 9 (s). Rekey Fuzz Percent (1-200) The maximum percentage of advance time margin for renegotiation; the total advance time ≤ Rekey Fuzz Percent *Rekey Margin Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 96 ZXV10 H11X (V1.0)Home Gateway User’s Manual Peer Authentication Adopted key negotiation mode; This product supports two key negotiation modes: Shared Secret and RSA Signature (select Main Mode for IKE Mode). The RSA Signature (for main mode) is recommended. Peer Key Key, a character string at a certain length consisting of number and English letter;...
  • Page 97 Remote Encryption Key (ESP only) Encryption algorithm key of incoming data; Fill it in with reference to Local Encryption Key. Authentication Algorithm Authentication algorithm of data completeness; This product supports the following algorithms, hash types Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 98 ZXV10 H11X (V1.0)Home Gateway User’s Manual lengths: HMAC-SHA1 (160) (which recommended) and HMAC-MD5 (128). Local Authentication Key Authentication algorithm outgoing data completeness; Make selection based algorithm type length selected Authentication Algorithm. For example, if HMAC- SHA1 (160) is selected, it is necessary to submit a 40-...

  • Page 99: Modifying/Deleting Connection

    Except the connection name cannot be modified, the security connection modifying method is consistent with its adding method. After modifying, the user can click the Submit button to submit the modification or click the Cancel button to cancel the modification. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 100 This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 101: Voip Configuration

    General configuration page, where you can select the signaling protocol used for VOIP, display the registration status of each subscriber line, and set the length and prefix of the internal phone number, the dial twice flag. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 102 ZXV10 H11X (V1.0)Home Gateway User’s Manual Signaling Selecting the signaling protocol used for VOIP, such as SIP/MGCP; you can also click the Apply button to re- register the VOIP module to SS. VOIP Status Displaying the registration status of each subscriber line;...

  • Page 103: Voice Configuration

    Enable using default scheme: Using the default scheme Enable using PT13 scheme: Using PT=13 scheme (not supported temporarily) Enable VAD but no silence information sent: Able to make silence detection but not send silence packet (not supported temporarily) Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 104 ZXV10 H11X (V1.0)Home Gateway User’s Manual DTMF Options DTMF Payload Redundancy: DTMF out-band redundancy mode (not supported temporarily) DTMF Payload Use 2833: 2833 mode adopted for DTMF DTMF in voice coding enable: DTMF in-band voice transparent transmission No DTMF payloads generated: No transmission (not...

  • Page 105: Sip Configuration

    5. Click the SIP Protocol link on the left side of the page to enter the Protocol configuration page. Protocol Configuration Click the Protocol link to enter the Protocol configuration page, where you can configure relevant parameters of the SIP. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 106: Phone Number

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Host Information Interface: Local interface used by VOIP Port: Local port used by VOIP First Proxy IP Address: IP address or domain name of the first Proxy server Port: Port of the first Proxy server...

  • Page 107: Media Configuration

    Click the Media link to enter the Media Setting page, which is used to declare one’s media capability in network communication. Currently, talk media and fax media can be configured. 1. Talk media Enable Enabling flag, whether to enable/disable this media configuration item Type Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 108 ZXV10 H11X (V1.0)Home Gateway User’s Manual Media type, indicating type media voice/video/data Codec Codec type, indicating the codec mode of the media type is G711U/G711A/G729/rfc2833 Payloadvalue Payload value, indicating the packet payload value of this media type; It is fixed for some codec types. For example, the payload value of G711A is 8, that of G711U is 0, that of G729 is 18 and that of rfc2833 is 97.

  • Page 109: Mgcp Configuration

    4. Click the Apply button to finish the MGCP protocol selection. Protocol Configuration Click the MGCP Basic link on the left side of the page to enter the MGCP configuration page, where you can configure basic parameters related with the MGCP. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 110 ZXV10 H11X (V1.0)Home Gateway User’s Manual Host Information Interface: Local interface used by MGCP protocol Port: Port of local interface used by MGCP protocol First CA Domain Name: Domain name of the first CA (Call Agent) IP Address: IP address of the first CA (Call Agent)

  • Page 111: Authentication Configuration

    Authentication Configuration Click the MGCP Auth link on the left side of the page to enter the Authentication configuration page, where you can configure authentication parameters related with the MGCP. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 112: Route Select Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual EAID Encryption authentication algorithm (not authenticated) or 1 (authenticated, with the algorithm No. as1) MGID MG ID, defaulted as iad.zte.com.cn Initial key, defaulted as 0123456789ABCDEF DH algorithm index: 1 (96 bytes) or 2 (128 bytes),...
  • Page 113 Office dial plan: Office direction dial plan PSTN setup IP Code: Internet telephony access code Prefix Dial Plan: PSTN dial plan Default office Setting the default office or route for each inner line Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 114: Service Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Service Configuration Click the Service Setup link on the left side of the page to enter the Service Setup page, where you can configure the forwarding service, hotline, ring at all Ext., call waiting, CID, CID restriction and polarity reversal billing services.

  • Page 115: Service Configuration Display

    Click the Service Show link on the left side of the page to enter the Service show page, which displays the service collection of each subscriber line of the device, including PN: the VOIP service number. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 116: Bluetooth Mac Address Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Bluetooth MAC Address Configuration Click the Bluetooth MAC Setup link on the left side of the page to enter the Bluetooth MAC Setup page. In this page, you can set the MAC address of the Bluetooth extension number.

  • Page 117: Other Operation Tools

    System Commands Click the System Commands link on the left part of the page to enter the System Commands page, where you can save the current setting, restart H110 restore default configuration. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 118: Network Continuity Test Tool: Ping

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Click the Save All button to save all your current settings. Once the Restart button is clicked, response of the WEB page will pause for a while because the device restart process requires a certain delay.

  • Page 119: User Management

    Confirming the new password The user with the Administrator rights can Note: completely configure the H110 while the user with the User rights can only perform partial configuration and management of the H110. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 120: Update Gateway

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Update Gateway Click the Update Gateway link on the left part of the WEB page to enter the Update Gateway page, where you can click the Browse button to select the local stored version and configuration file, click...

  • Page 121: Showing System Logs

    After the system is powered down, the log record before powering down can be still obtained. Showing System Logs Click the Logs link on the page to enter the log showing page. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 122 ZXV10 H11X (V1.0)Home Gateway User’s Manual This page provides four buttons. You can click them to implement the following functions: Refresh Showing the current latest 20 log records Save Saving the current log record to flash Clear Clearing the current log record, that is, there is 0 log now...

  • Page 123: Device Status Check

    Click the PPPoE Status link on the left part of the WEB page to enter the PPP Connections Status page, where you can view the PPP connection status information: the IP address and online time of the PPP connection. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 124: System Statistics

    ZXV10 H11X (V1.0)Home Gateway User’s Manual System Statistics Click the System Status link on the left part of the page to enter the System Information page, where you can view the basic status when the system runs: uptime, memory and CPU usage.

  • Page 125: Network Statistics

    Ethernet Interface Statistics Click the Ethernet link to display the statistics of received/sent packets on the Ethernet interface. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 126: Wlan Interface Statistics

    ZXV10 H11X (V1.0)Home Gateway User’s Manual WLAN Interface Statistics Click the WLAN link on the page to display the statistics of received/sent packets on the WLAN interface. Bluetooth Interface Statistics Click the Bluetooth link on the page to display the statistics of received/sent packets on the Bluetooth interface.

  • Page 127: Usb Interface Statistics

    Chapter 9 - Device Status Check USB Interface Statistics Click the USB link on the page to display the statistics of received/sent packets on the USB interface. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 129: Voice Typical Configurations

    3. Select SIP from the Signaling protocol box. 4. Set the Length and Prefix of the internal phone number from Ext. number setup. 5. Whether enabling Two-stage dialing flag. 6. Click the Apply button to finish the SIP protocol selection. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 130: Step2 Sip Protocol Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Step 2 SIP Protocol Configuration 1. Click the SIP Protocol link on the left part to enter the SIP configuration page. 2. Select the uplink interface and port from the Host Information field. 3. Fill in the IP address (or domain name) and port for the first proxy server in the First Proxy field.

  • Page 131: Step 3 Check Port Status

    WEB page. 2. Click the System Commands link on the left part of the WEB page to enter the System Commands page. 3. Click the Save All button to save all the configuration modifications. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 132: Mgcp Typical Configuration

    ZXV10 H11X (V1.0)Home Gateway User’s Manual MGCP Typical Configuration Step 1 Select Protocol Type 1. Click the VOIP button on the WEB page to enter the VOIP configuration page. 2. Click the General link on the left part of the page to enter the General configuration page for VOIP.

  • Page 133: Step 2 Configure Mgcp Protocol

    6. Configure the register mode and the name prefix (which are provided by the service provider) for the port (End Point). If the service provider does not provide them, use the default value. 7. Click Apply to finish the basic MGCP configuration. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 134: Step 3 Check Port Status

    ZXV10 H11X (V1.0)Home Gateway User’s Manual Step 3 Check Port Status Click the General link on the left part of the page to query the port status. If the both ports are displayed In Service you can make a call.

  • Page 135: Appendix

    Check that the Ethernet cable is properly connected to the after PC/HUB and H110, and the power supply to the PC/HUB is connect turned on. Ethernet cable. Network access failure Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 136 ZXV10 H11X (V1.0)Home Gateway User’s Manual Problem Recommended Solution WLAN connection Check if the RF switch of the WLAN is turned on and if the WLAN cannot indicator is on. established. Use the ping command to check if the LAN-side interface IP address (the default IP address of LANGROUP1 is 192.168.1.1)
  • Page 137 Tools page to click the Save All button to save it. Only after restart. in this way, can your configured parameters take effect after the H110 is powered on next time. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 138 ZXV10 H11X (V1.0)Home Gateway User’s Manual This page is intentionally blank. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 139: Appendix

    The quantity of data can be transmitted in a fixed length of time Broadband Broadcast technology supporting voice, image and data transmission via multiple channels. DDNS Network server providing IP setup binding relation of fixed domain name and dynamic change DHCP Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 140 ZXV10 H11X (V1.0)Home Gateway User’s Manual DHCP (Dynamic Host Configuration Protocol) can allocate dynamic IP address to the device on network. Dynamic address means the device can get a different IP address when it connects the network each time. DNS (Domain Name Server) translates the name of network node in Internet into the network address.

  • Page 141: Appendix B

    IP address is the 32-bit address in TCP/IP used to identity the host. There are five categories of IP addresses (A, B, C, D and E), which are in the 8-bit data format with 4 separations, such as 2.1.1.2. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 142 ZXV10 H11X (V1.0)Home Gateway User’s Manual Each address covers the network address, optional subnet address and host address. Network address and subnet address are combined for routing, host address is used to identify the independent host in the network or subnet, subnet mask is used to get network and subnet information from the IP address.
  • Page 143 SPI (Stateful Packet Inspection) inspects both the packet header and the packet content. It can specify the packet source and destination address and other more information. In addition, the state inspection firewall also closes the port, till the specific port request comes. Confidential and Proprietary Information of ZTE CORPORATION...
  • Page 144 HTTP or FTP. It is the unique name convention that identifies specific computers, directories and file locations on the Internet. For example, the URL of ZTE Corporation is http://www.zte.com.cn. VPN (Virtual Private Network) provides a mode for securely transmitting data in Internet through access control and encryption.
  • Page 145 Although some WANs are private, they are usually deemed as a network for public access. WEP (Wired Equivalent Privacy) is a data encryption mode based on 64bit shared key coding, and it is described in the IEEE 802.11b standard. Confidential and Proprietary Information of ZTE CORPORATION...

  • Page 147: Tables

    Tables Table 1 Typographical Conventions ..........xi Table 2 Mouse Operation Conventions ........xii Table 3 Safety Signs .............. xiii Confidential and Proprietary Information of ZTE CORPORATION...

Table of Contents