Navigation Settings - Lowrance HDS Live Operator's Manual

Navigation settings

Arrival radius
Sets an invisible circle around the destination waypoint.
The vessel is considered arrived at the waypoint when it is within
this radius.
XTE limit
This setting defines how far the vessel can deviate from the selected
route, if the vessel goes beyond this limit, an alarm is activated.
XTE alarm (Cross track error)
Turns on/off the XTE alarm.
Trails
Opens the Trails dialog where trails settings can be adjusted and
trails can be converted into routes for navigation. Refer to "About trails"
on page 57.
Logging type
You can select to record trail points based on time, distance, or by
letting the unit position a point automatically when a course
change is registered.
Specify one of the following logging types in the Navigating
Settings dialog:
63
Navigating | HDS Live Operator Manual