Acknowledging A Message; Alarm Settings - Lowrance HDS Live Operator's Manual

with the last activated alarm at the top. The remaining alarms are
available in the alarms dialog.

Acknowledging a message

The alarm dialog have one or two option for acknowledging a
message:
• Close
Sets the alarm state to acknowledged, meaning that you are
aware of the alarm condition. The siren/buzzer stops and the
alarm dialog is removed.
However, the alarm remains active in the alarm listing until the
reason for the alarm has been removed.
• Disable
Disables the current alarm setting. The alarm does not show
again unless you turn it back on in the alarm settings dialog.
There is no time-out on the alarm message or siren. They remain
active until you acknowledge the alarm or until the reason for the
alarm is removed.

Alarm settings

You enable or disable the alarm siren from the alarm settings dialog.
This dialog also give access to the settings dialog from where you
enable or disable all system alarms.
Alarms| HDS Live Operator Manual
183