Ebl/Vrm Markers - Lowrance HDS Live Operator's Manual

EBL/VRM markers

The electronic bearing line (EBL) and variable range marker (VRM)
allows quick measurements of range and bearing to vessels and
landmasses within radar range. Two different EBL/VRMs can be
placed on the radar image.
The EBL/VRMs are by default positioned from the center of the
vessel. It is, however, possible to offset the reference point to any
selected position on the radar image.
Defining an EBL/VRM marker
1.
Ensure that the cursor is not active
2.
Activate the menu, select EBL/VRM, then select EBL/VRM 1 or
EBL/VRM 2
- The EBL/VRM is now positioned on the radar image
3.
Select the adjustment option from the menu if you need to
reposition the marker
- Adjust the marker by dragging it into position
4.
Save your settings.
Turning EBL/VRM markers on and off
When an EBL/VRM marker is positioned, you can turn the EBL/VRM
on/off by:
• deselecting the marker from the menu
Placing EBL/VRM markers by using the cursor
1.
Position the cursor on the radar image
2.
Activate the menu
3.
Select one of the EBL/VRM markers
- The EBL line and the VRM circle are positioned according to
the cursor position.
Offsetting an EBL/VRM marker
1.
Ensure that the cursor is not active
2. Activate the menu, select EBL/VRM, then select the marker you
wish to offset
3.
Select the set offset option
4.
Position the cursor on the radar panel to set the offset position
5.
Select the save option to save your settings.
Radar| HDS Live Operator Manual
141