Fusion-Link Integration; Bep Czone Integration; Power-Pole Anchors - Lowrance HDS Live Operator's Manual

194
• An Evinrude button is added to the control bar - selecting this
button opens the engine controller. Use the engine controller to
control the engines.
A maximum of two control heads and four engines is supported.
For more information, refer to the engine manual or engine
supplier.

FUSION-Link integration

FUSION-Link devices connected to the NMEA 2000 network can be
controlled from the system.
The FUSION-Link devices appear as additional sources when using
the audio function. No additional icons are available.
Refer to "Audio" on page 148 for more information.

BEP CZone integration

The unit integrates with BEP's CZone system used for controlling
and monitoring a distributed power system on your vessel.
The CZone icon is available in the toolbar on the Home page when
a CZone system is available on the network.
A separate manual is provided with your CZone system. Refer to this
documentation and to the unit's Installation manual for how to
install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone
dashboard is added to the Info panels.
You switch between a panel's dashboards by selecting the left and
right arrow symbols or by selecting the dashboard from the menu.
Editing a CZone dashboard
You can customize a CZone dashboard by changing the data for
each of the gauges. Available editing options depend on the type of
gauge and which data sources that are connected to your system.
For more information, refer to "Info panels" on page 102.

Power-Pole anchors

Power-Pole anchors, which can be controlled by the C-Monster
Control System installed on your boat, can be controlled from the
Integration of 3 party
Manual
devices| HDS Live Operator