Setting Up The Image - Lowrance HDS Live Operator's Manual

3. Move the position adjustment scroll bar so the top of the V in
the image is centered at the top of the panel.
Ú Note: The V on the image represents the beams of the
SpotlightScan transducer. The wide end of the V should be
aligned in the direction the trolling motor is pointing.
Ú Note:
Do not use the arrow indicator on the trolling motor
head as a heading reference as it might not be aligned correctly
with the trolling motor.

Setting up the image

Source
Ú Note:
Available only if multiple sources with the same
capability are available.
Used to specify the source for the image in the active panel.
You can display different sources simultaneously, using a multi-
panel page configuration. Menu options for each panel are
independent.
Ú Note:
Using transducers at the same frequency can cause
interference.
For source setup information, refer to the HDS Live Installation
Manual.
Range
You can control how much of the area around your boat appears on
the display by increasing or decreasing the range.
SpotlightScan| HDS Live Operator Manual
95