Dual Radar; Radar Operational Modes - Lowrance HDS Live Operator's Manual

Radar symbology can be turned ON/OFF collectively from the Radar
menu, or individually as described in Radar settings panel.

Dual radar

You can connect to any combination of two supported radars and
see both radar images at the same time.
Ú Note:
Interference will be seen on the Broadband Radar on
most ranges when a pulse or Halo radar, and a Broadband radar
are transmitting at the same time on the same boat. We
recommend to only transmit on one radar at a time. For
example, transmit Broadband radar for typical navigational
usage, or pulse or Halo radar to locate weather cells, defined
coastlines at a distance and to trigger Racons.
You can select a dual radar panel by pressing and holding the Radar
application button on the Home page, or by creating a favorite
page with two radar panels.
Selecting the radar source
You specify the radar in the Radar panel by selecting one of the
available radars in the radar source menu option. If you have a
multiple Radar panel, the radar is set individually for each radar
panel. Activate one of the radar panels, and then select one of the
available radars in the radar source menu option. Repeat the
process for the second radar panel, and select an alternative radar
for this panel.
Ú Note:
The 3-digit radar source number is the last 3 digits of the
radar's serial number.

Radar operational modes

The radar's operational modes are controlled from the Radar menu.
The following modes are available:
Power off
The power to the radar scanner is turned off. Power off is only
available when radar is in standby mode.
Radar| HDS Live Operator Manual
127