Viewing History; Recording Sidescan Data; Setting Up The Image - Lowrance HDS Live Operator's Manual

80

Viewing history

In a SideScan view, pan the image to see sides and history by
dragging the image left, right, and up.
To resume normal SideScan scrolling, select the clear cursor option.

Recording SideScan data

SideScan data can be recorded by selecting the correct file format in
the record dialog. Refer to "Start recording sonar data" on page 67.

Setting up the image

Use the SideScan menu to set up the image. When the cursor is
active, some options in the menu are replaced with cursor mode
features. Select the clear cursor option to return to the normal
menu.
Source
Ú Note:
Available only if multiple sources with the same
capability are available.
Used to specify the source for the image in the active panel.
You can display different sources simultaneously, using a multi-
panel page configuration. Menu options for each panel are
independent.
Ú Note:
Using transducers at the same frequency can cause
interference.
For source setup information, refer to the HDS Live Installation
Manual.
SideScan | HDS Live Operator Manual