Map Charts - Lowrance HDS Live Operator's Manual

• Safety shading – uses the safety depth setting to shade the color
lower than the set safety depth. Also enables the Safety depth
option on the Genesis live menu.
Safety depth
Sets the safety depth. Areas that are shallower than the safe
minimum depth are shaded. This option is only available if the
Safety shading palette is selected.
Radar overlay
The radar image can be overlayed on the chart. This can help you to
easily interpret the radar image by correlating the radar targets with
charted objects.
Ú Note:
A heading sensor must be present in the system for radar
overlay.
When the radar overlay is selected, basic radar operational functions
are available from the Chart panel's menu. For information about
the radar menu options, refer to "Radar" on page 126.
Selecting radar overlay source on chart panels
To select the radar source of the radar overlay displayed on the
chart panel, use source menu option. This option is available under
Radar options when radar is selected as the overlay.
For chart pages with more than one chart with radar overlay, it is
possible to set up different radars sources for each chart panel.
Activate one of the chart panels and then select one of the available
radars in the radar source menu option. Repeat the process for the
second chart panel with radar overlay, and select an alternative
radar for this panel.
C-MAP charts
All possible menu options for C-MAP charts are described below.
The features and menu options available can vary depending on the
charts you use. This section shows menus from a C-MAP chart.
Ú Note:
A menu option is greyed out if the feature is not available
on the chart displayed.
Charts | HDS Live Operator Manual
39