Viewing Image History; Setting Up The Image - Lowrance HDS Live Operator's Manual

90

Viewing image history

The highlighted part of the history bar shows the image you are
currently viewing in relation to the total image history stored.
The history bar appears by default when the cursor is active. You
can turn off the history bar, have it always shown at the top of the
screen, or have it appear only when the cursor is active. Refer to
"Clear live history" on page 92.
The history bar is at the top of the screen on 3D images.
You pan the image history by dragging on the image, or by
dragging the highlighted region of the history bar.
To resume scrolling showing current data, select the clear cursor
option or press the exit key.

Setting up the image

Source
Ú Note:
Available only if multiple sources with the same
capability are available.
Used to specify the source for the image in the active panel.
You can display different sources simultaneously, using a multi-
panel page configuration. Menu options for each panel are
independent.
Ú Note:
Using transducers at the same frequency can cause
interference.
For source setup information, refer to the HDS Live Installation
Manual.
Range
The range setting determines the distance out to the left and right
of the center.
Preset range levels
Select a preset range level manually from the menu.
3D Sonar | HDS Live Operator Manual