Table of Contents
Advertisement
15
Video
The video function allows you to view videos or camera sources on
your system.
Ú Note:
The video images are not shared from the Ethernet
network. You can only view the video on the unit connected to
the video source.
The Video panel
A video panel can be set up as a single panel, or as one of the
panels on a multiple panel page.
The video image is proportionally scaled to fit into the video panel.
Areas not covered by the image are colored black.
Setting up the video panel
Video source
The unit supports two video input channels.
You can select to view one channel only, or to cycle the image
between available video cameras.
Video source
This unit supports NTSC and PAL video. Check the local video
standard or the standard of your cameras.
Adjusting the video image
You can optimize the video display by adjusting the video image
settings. The settings are adjusted individually for each video
source.
Video| HDS Live Operator Manual
103
- Quick Links:
- The Front Panel Keys
Hide quick links:
Advertisement
Table of Contents
