Viewing History; Recording Log Data - Lowrance HDS Live Operator's Manual

3.
Position the cursor on the second measuring point
- A line is drawn between the measuring points, and the
distance listed in the Cursor Information window
4.
Continue selecting new measuring points if required
Use menu options to re-position the start point and the end point
as long as the measuring function is active.
Select the finish measuring menu option or press the exit key to
resume normal image scrolling.

Viewing history

You can view sonar history by panning the image. You can also use
the preview feature to pan history, refer to "Preview" on page 75.
To resume normal scrolling, select Clear cursor or press the exit key.

Recording log data

Start recording log data
You can start recording log data and save the file internally in the
unit, or save it onto a storage device connected to the unit.
The Log sonar dialog is activated from the System Controls dialog,
or from the Sonar Settings dialog.
When the data is being recorded, there is a flashing red symbol in
the top left corner and a message appears periodically at the
bottom of the screen.
When you select to start recording, the record sonar log dialog is
displayed where you specify recording settings.
Sonar | HDS Live Operator Manual
67