120
•
Rate of turn. Increasing the value makes the vessel turn a smaller
circle.
Spiral
Makes the vessel turn in a spiral with a decreasing or increasing
radius.
Turn variables:
•
Initial radius
•
Change/turn. If this value is set to zero, the boat will turn in a
circle. Negative values indicate decreasing radius while positive
values indicate increasing radius
Zigzag
Steers the vessel in a zigzag pattern.
Turn variables:
•
Course change
•
Leg distance
Square
Steers the vessel in a square pattern, doing 90° course changes.
Turn variable:
•
Leg distance
S-turn
Makes the vessel yaw around the main heading.
Turn variables:
•
Course change
•
Turn radius
Depth contour tracking
Makes the autopilot follow a depth contour.
Ú Note:
DCT turn pattern is only available if the system has a valid
depth input.
Outboard
autopilot| HDS Live Operator Manual