3D Mode Options; Fish Renderings - Lowrance HDS Live Operator's Manual

If the cursor is positioned on a 3D image, no depth information is
included for the waypoint. The waypoint on a 3D image is drawn
with a line beneath it to indicate its point on the sea floor.

3D mode options

There are two modes for the 3D panel:
• Vessel mode
• Cursor mode
Switch between vessel mode and cursor mode by selecting the 3D
panel buttons. You can also return from cursor mode to vessel
mode by selecting the clear cursor menu option.
3D vessel mode
In this mode, the view is locked to the vessel, and the image moves
with the vessel.
The camera can be rotated around the vessel, and the camera
elevation changed to look down or look more sideways from the
vessel:
• To change the camera rotation, drag horizontally on the screen
• To change the camera elevation and tilt, drag vertically on the
screen
3D cursor mode
When you activate cursor mode, the camera position is the same as
when cursor mode was enabled.
In cursor mode, the image does not move with the vessel. The
image can be zoomed, and the camera can be rotated in any
direction by dragging on the screen.
Cursor mode includes the cursor functions described in "Using the
cursor on a 3D image" on page 88.

Fish renderings

When objects are identified in the water column, they are shown as
clusters of dots. The point color corresponds to the target intensity,
and the point colors are automatically adjusted to complement the
chosen palette.
3D Sonar | HDS Live Operator Manual
89