Genie S-60X Operator's Manual page 54

Operator's Manual
Operating Instructions
Platform Capacity Selection
At the Ground Controls
Determine the weight of all occupants, equipment
and materials in the platform.
Refer to the load chart on this page or on the
machine to determine the available working range
of motion.
Move and hold the platform capacity
select/function enable switch to select the platform
capacity.
Less than 501 lbs / 227 kg: The range of motion is
unrestricted.
501-1000 lbs / 227-454 kg: The range of motion is
restricted.
The machine will stop when the machine reaches
the limit of the restricted range of motion. Raise or
retract the boom to continue.
52
At the Platform Controls
Two light blinking indicates that the capacity has
not been selected.
Determine the weight of all occupants, equipment
and materials in the platform.
Refer to the load chart on this page or on the
machine to determine the available working range
of motion.
Move and hold the platform capacity
select/function enable switch to select the platform
capacity.
Less than 501 lbs / 227 kg: The range of motion is
unrestricted.
501-1000 lbs / 227-454 kg: The range of motion is
restricted.
The machine will stop when the machine reaches
the limit of the restricted range of motion. Raise or
retract the boom to continue.
If the red Emergency Stop button is pushed in and
pulled back out, the platform capacity will need to
be selected again.
If the machine is started when the platform is
outside the restricted range of motion, the 500 lbs /
227 kg capacity light will flash. Select 500 lbs /
227 kg capacity to continue. Do not exceed the
platform capacity of 500 lbs / 227 kg.
S-60X
Second Edition • First Printing
Part No. 1261735