Genie S-60X Operator's Manual page 30

Operator's Manual
Controls
Ground Control Panel
1 LCD readout screen
Screen displays hour meter, voltage, oil
pressure and coolant temperature. Screen
also displays fault codes and other service
information.
2 Not used
3 Not used
4 Engine start switch
Move the engine start switch to either side to
start the engine.
5 Engine idle (rpm) select switch
Move the engine idle select switch to the turtle
position for foot switch activated low idle.
Move the engine idle select switch to the rabbit
position for foot switch activated high idle.
6 Not used
7 Emergency power switch
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch to either side and activate the desired
function.
28
8 Turntable rotate switch
Move the turntable rotate switch to the right
and the turntable will rotate to the right. Move
the turntable rotate switch to the left and the
turntable will rotate to the left.
9 Boom up/down switch
Move the boom up/down switch up and the
boom will raise. Move the boom up/down
switch down and the boom will lower.
10 Machine malfunction indicator light
Light on indicates all functions have stopped.
See the instructions in the Operating
Instructions section.
11 Boom extend/retract switch
Move the boom extend/retract switch to the
right and the boom will extend. Move the boom
extend/retract switch to the left and the boom
will retract.
12 Platform capacity select/function enable switch
Move and hold the platform capacity
select/function enable switch to select the
platform capacity and enable the ground
control panel functions to operate. The range
of motion is restricted if 1000 lbs / 454 kg
platform capacity is selected.
S-60X
Second Edition • First Printing
Part No. 1261735