Genie S-60X Operator's Manual page 33

Second Edition • First Printing
Pre-operation Inspection
 Be sure that the operator's, safety and
responsibilities manuals are complete, legible
and in the storage container located in the
platform.
 Be sure that all decals are legible and in place.
See Inspections section.
 Check for hydraulic oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.
 Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
 Check for engine oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
 Check for engine coolant leaks and proper
level of coolant. Add coolant if needed. See
Maintenance section.
 Check for proper tire pressure. Add air if
needed. See Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
 Electrical components, wiring and
electrical cables
 Hydraulic hoses, fittings, cylinders and
manifolds
 Fuel and hydraulic tanks
 Drive and turntable motors and drive hubs
 Wear pads
 Tires and wheels
Part No. 1261735
 Engine and related components
 Limit switches and horn
 Alarms and beacons (if equipped)
 Nuts, bolts and other fasteners
 Platform entry mid-rail or gate
Check entire machine for:
 Cracks in welds or structural components
 Dents or damage to machine
 Excessive rust, corrosion or oxidation
 Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
 After you complete your inspection, be sure
that all compartment covers are in place and
latched.
S-60X
Operator's Manual
Inspections
31