Genie S-60X Operator's Manual page 26

Operator's Manual
Controls
Platform Control Panel
1 Horn button
Press this button and the horn will sound.
Release the button and the horn will stop.
2 Platform level switch
Move the platform level
switch up and the level of
the platform will raise.
Move the platform level
switch down and the level
of the platform will lower.
3 Platform rotate switch
Move the platform rotate
switch to the left and the
platform will rotate left.
Move the platform rotate
switch to the right and the
platform will rotate right.
4 Jib boom up/down switch
Move the jib boom
switch up and the jib
boom will raise. Move
the jib boom switch
down and the jib boom
will lower.
5 Drive speed select switch
Machine on incline symbol: Low range
operation for inclines.
Machine on level surface symbol: High range
operation for maximum drive speed.
24
6 Emergency power switch
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch to either side and activate the desired
function.
7 Machine not level indicator light
Light is on when the tilt alarm is sounding.
Move the machine to level ground.
8 Generator switch (if equipped)
Move the generator switch up to activate the
generator. Move the switch down to turn off
the generator.
9 1000 lbs / 454 kg capacity indicator light
Light on indicates that the selected platform
capacity is 1000 lbs / 454 kg. The range of
motion is restricted.
10 Platform capacity select switch
Move the platform capacity select switch to the
left to select 1000 lbs / 454 kg platform
capacity. Move the platform capacity select
switch to the right to select 500 lbs / 227 kg
platform capacity.
11 500 lbs / 227 kg capacity indicator light
Light on indicates that the selected platform
capacity is 500 lbs / 227 kg. The range of
motion is unrestricted.
12 Used for optional equipment
S-60X
Second Edition • First Printing
Part No. 1261735