Table of Contents
Advertisement
E18E
ZERO CLEARANCE FRAMING
When installing the E18E as a zero clearance, you will use the
framing clearances in the following diagrams. Mantel and inside corner
clearances can be found in Minimum Clearances to Combustibles.
ZERO CLEARANCE INSTALLATION
1. When framing is complete, ensure wiring is installed by an electrician
prior to installing the unit.
2. Assemble ZC surround with 8 (904-897) screws provided in locations
shown below.
Assemble the ZC
3. Secure surround to the stud on each side with wood screws (not sup-
plied).
Use 4 screws on each side to secure
surround to studs.
2
installation
surround with 4
screws on each
side.
Regency
E18E Gas Fireplace Insert
®
|
51
|
51
Advertisement
Table of Contents
