Modification Of Montigo Econo Plus 28C - Regency Energy E18E Owners & Installation Manual

installation
|
22
MODIFICATION OF MONTIGO
ECONO PLUS 28C
1. Turn off unit and Disconnect Gas.
2. Remove Top Louver Bars.
3. Remove Mesh Door Frame by removing 7 screws (See Diagram below).
Remove 7 screws - remove Mesh Door Frame (if installed).
4. Remove Upper Bracket by removing 2 screws.
Remove 2 screws - remove Top Bracket
5. Remove Bracket and Thermodisc by removing 2 screws.
Remove 2 screws - remove Thermodisc Bracket
22 |
Regency ® E18E Gas Fireplace Insert
6. Remove heat deflector by removing 3 bolts and nuts.
Remove 3 bolts and nuts to remove heat deflector.
7. Remove the rear baffle.
Remove rear baffle.
8. Remove 2 bolts from underneath, to remove valve, log tray, etc.
9. Lift entire assembly out.
Remove 2 bolts