installation
|
23
10. Remove Serial No. Decal attached to valve assembly and affix to wall of
13. Cut to remove left and right cross piece at front of firebox.
28C firebox.
Montigo Serial Decal
Cut out front cross piece to remove
11. Flatten left and right louver brackets.
14 Cut out back cross bar to complete modification. Fold back any excess
metal after removing the cross piece.
Flatten louver brackets
12. Flatten flange (left ,right and rear) in locations shown below.
Cut out back cross bar
|
23
Regency
E18E Gas Fireplace Insert
®