Regency Energy E18E Owners & Installation Manual page 27

installation
|
27
12. Bend Top Face Down (See Diagram 7.9).
9. Remove Sand Pan and Pilot Assembly.
Diagram 7.9
13. Measure and draw a line 1" below the bottom of the exhaust
collar (See Diagram 7.10).
Diagram 7.6
10. Cut out the Bottom of the Firebox (See Diagram 7.7)
Cut must be clean - with Max. 1/4" of material left.
Diagram 7.10
14. Cut the Sides of the Top of the Firebox Flush with the Sides of
the Firebox and Cut the Top of the Firebox 1" below the bottom
of the Exhaust Collar (See Diagram 7.11 and 7.12).
Diagram 7.7
11. Cut the Sides of the Top Face (See Diagram 7.8).
Diagram 7.11
Diagram 7.12
Diagram 7.8
| 27
Regency E18E Gas Fireplace Insert
®