Regency Energy E18E Owners & Installation Manual page 44

Gas insert
Hide thumbs Also See for Energy E18E:
Table of Contents

Advertisement

installation
|
44
15. Install supplied support section with 8 screws to reinforce
Firesong firebox. (See Diagram 10.14).
Diagram 10.14
16. Repeat Steps 14 & 15 on left side.
17. Remove existing Firesong rating plate from cut out firebox.
This rating plate must be retained and affixed to the unit. (See
Diagram 10.15 and 10.16).
Diagram 10.15
44 |
Regency
®
E18E Gas Fireplace Insert
18. Final modified firebox should look like Diagram 10.16
NOTE: Shown with flue collar and 6" length of flex installed.
Firesong decal affixed
Diagram 10.16
IMPORTANT NOTE:
Separate inner and outer firebox on E18E (see instructions in this
manual) Before installing outer firebox - lay on a flat surface and
trim off 1-1/4" of each firebox fastening flange as shown below.

Advertisement

Table of Contents
loading

This manual is also suitable for:

E18e-lpE18e-ng

Table of Contents