Modification Of Firesong 120N - Regency Energy E18E Owners & Installation Manual

installation
|
42

MODIFICATION OF FIRESONG 120N

1. Turn off gas supply, if unit has a fan - turn off and disconnect power.
2. Remove Top Trim Pieces and Glass Doors- if installed (See
Diagram 10.1).
3. Remove Lower Trim piece and Bottom Panel. (See Diagram
10.2).
4. Remove Top Rail securing Mesh. (See Diagram 10.3).
5. Shut off and disconnect gas line from valve.
42 |
Regency ® E18E Gas Fireplace Insert
Diagram 10.1
Diagram 10.2
Diagram 10.3
6. Unscrew and Remove Trim Around Sand Pan (See Diagram
10.4).
7. Remove Logs (See Diagram 10.5).
8. Remove screw on right side to remove sand pan and base.
(See Diagram 10.6).
9. Remove Valve.
10. Make 2 vertical cuts on Top Facing. (See Diagram 10.7).
Diagram 10.7
Diagram 10.4
Diagram 10.5
Diagram 10.6