Regency Energy E18E Owners & Installation Manual page 36

installation
|
36
8. Unscrew and Remove Trim Around Sand Pan (See Diagram
8.5).
9. Disconnect Pilot Gas Line and Pilot Thermopile from Valve.
10. Disconnect Valve from Main Burner Gas Line.
11. Remove Plate On the Bottom of the Firebox where Pilot Enters.
(See Diagram 8.6)
12. Unscrew Left and Right Nuts Underneath the Firebox Holding
Down the Sand Pan. (See Diagram 8.7)
13. Remove Sand Pan and Pilot Assembly.
36 |
Regency ® E18E Gas Fireplace Insert
Diagram 8.6
Diagram 8.7
14. Unscrew the Bottom of the Firebox. (See Diagram 8.8)
15. Unscrew the Firebox Top Front Flange, making sure to place the
Top Left and right corner screws back in (See Diagram 8.9 and
8.10).
Diagram 8.10
Diagram 8.8
Diagram 8.9