Savin 3699 Operating Instructions Manual page 99

Sending a Fax Message
Limitation
The following kinds of destina-
tions are not memorized:
• Group Dials
• Destinations dialed by a Key-
stroke Program
• Destinations dialed as End Re-
2
ceivers for Transfer Request
• Destination of Memory File
Transfer
• Destinations dialed using the
external telephone keypad
• Destinations dialed by Redial
(regarded as already memo-
rized)
• Any destinations after the first
number if multiple destinations
were dialed.
Do not dial any digits before you
press the Redial key. If you press
the {Pause/Redial} key after enter-
ing digits using the number keys, a
pause will be entered instead.
The machine only remembers the
most recent single number that
was dialed with a Quick Dial or
Speed Dial. If a transmission takes
place dialing with the number
keys after sending using a Quick
Dial or Speed Dial, the previous 10
memorized numbers are erased.
A
Press the {Pause/Redial} key.
78
B
A list of previously dialed num-
bers will flash up. If you cannot
see the number you need use the
[ Prev. ] and [ Next ] keys to scroll
through them. Then enter the
code of the number you wish to
redial e.g., "01".
Note
If the receiver uses a fax of the
same manufacturer that is capa-
ble of registering the RTI, that
name may be shown on the dis-
play instead of the fax number.