Savin 3699 Operating Instructions Manual page 70

"Printing a List of Files in Memory
(Print TX File List)"
If memory runs out while storing a
document
If you run out of memory while
storing a document (free space
reaches 0%), the following display
will appear:
When there is a document jam
A Check the message on the dis-
play then press [OK].
B
Remove the document.
Reference
P.166 "Clearing
Jams".
Batch Transmission
If you send a fax message by Mem-
ory Transmission and there is an-
other fax message waiting in
memory to be sent to the same des-
tination, that message is sent along
with your document. Several fax
messages can be sent with a single
call, thus eliminating the need for
several separate calls. This helps
save communication costs and re-
duce transmission time.
Fax messages for which the trans-
mission time has been set in ad-
vance are sent
Transmission when that time is
reached.
Dual Access
The machine can scan other mes-
sages into memory even while
sending a fax message from mem-
ory, receiving a message into
memory, or automatically printing
a report.
Since the machine starts sending
the second message immediately
after the current transmission ter-
minates, the line will be used effi-
ciently.
Note
Document
Transmission, when copying, or
when the User Tools menu is open,
the machine cannot scan in docu-
ments.
ECM (Error Correction Mode)
This feature automatically resends
data that wasn't transmitted suc-
cessfully using a system that com-
plies with international standards.
ECM requires that the destination
machine has the same feature.
Parallel Memory Transmission
With Parallel Memory Transmis-
sion the machine dials the destina-
tion while the document is being
by Batch
scanned in. Standard Memory
Memory Transmission
Note
By default Batch Transmission
is switched on. You can switch
it on or off with the User Param-
eters. P.236 "Changing the
User Parameters"
If you store the Batch Transmis-
sion function in a User Function
key ({F1} to {F5}), you can turn
it on or off by just pressing that
key. The User Function key in-
dicator will light when Batch
Transmission is turned on.
that during
2
Immediate
49