File Reserve Report (Memory Transmission); Communication Result Report (Memory Transmission) - Savin 3699 Operating Instructions Manual

Sending a Fax Message
Transmission stores the document
in memory, then dials the destina-
tion. Parallel Memory Transmis-
sion allows
determine whether a connection
was made. In addition, this func-
tion scans the document faster
than Immediate Transmission and
2
is useful when you are in a hurry
and need to use the document for
another purpose.
Note
By default this feature is turned
on. You can change this with the
User
"Changing the User Parameters"
Limitation
Standard Memory Transmis-
sion is used instead of Parallel
Memory Transmission in the
following cases:
• When the line is busy and
could not be connected to
• With Send Later
• With Transfer Request
• With Duplex Original
• When you store a document
for Memory Transmission
while another communica-
tion is in progress
• When two or more destina-
tions are specified
• When you send just an Auto
Document
• With Image Rotation
If you press the {Stop} key, the
document jams, or memory be-
comes
Memory Transmission, the ma-
chine stops transmitting and
prints the Communication Re-
sult Report (Memory Transmis-
sion). The file is erased.
50
you to quickly
Parameters. P.236
full during Parallel
Total stored page numbers are
not printed with Parallel Memo-
ry Transmission. Only the page
numbers are printed, such as
1
P.1, P.2 not /
Note
If you run out of memory, nor-
mal Memory
takes place. When and if this
happens varies depending on
the various options you have in-
stalled.
File Reserve Report (Memory
Transmission)
This report is printed after a docu-
ment is stored in memory. It helps
you review the contents and regis-
tered destinations of documents
stored for transmission. Even if the
machine is set up not to print this re-
port, it is still printed if a document
could not be stored.
Limitation
This report is not printed for mes-
sages sent using Parallel Memory
Transmission.
Note
You can turn this report on and off.
By default it is not printed.
"Changing the User Parameters"
You can choose whether to include
part of the document image on the
report (part of the image is printed
by default). P.236 "Changing the
User Parameters"
Communication Result Report
(Memory Transmission)
This report is printed when a Memo-
ry Transmission is completed so you
2
, /
2 2
Transmission
P.236